Thanks! I've got a moisture meter, so I'll make sure everything I burn is ready before it goes in the stove.
Yep! My neighbor had 5 trees cut down a few days before, and I asked the crew that was hauling away the trees to leave a few cord for me! :-)...
My neighbor cut down 5 pine trees from his backyard. I asked the tree service to leave a couple cords for me and they did. The alley behind our...
I put in a wood stove last winter, and Englander NC-30. Since the build was complete in the winter I didn't have a wood shed built yet. I built...
I already have. I cut about an inch off the bottom. If I cut them down anymore I will lose the threaded section at the bottom for the bolts used...
Legs, Set of 4 Cast (Black) 6" | Part Number: CA-S12B Anybody have a set of 6" legs compatible with the NC30 they want to sell or trade? I have...
One of the more pertinent paragraph's from the article: "It is sometimes assumed that taking air from outside through a duct saves energy because...
I think they are saying that the amount of air used by a modern wood stove is small compared to the air being leaked, therefore adding an OAK has...
I have done some research on OAK 's and the validity of installing them and see many conflicting opinions and articles. The article below pleads...
Marvin - I run my fan pretty much 24/7. I think of the fan as the house thermostat. The higher the fan, the more hot air get's pushed throughout...
My AC30 blower is running near 100% for nearly 24 hour a day. My NC30 is able to almost entirely heat my 2200sq ft 1884 multi-level home with...
How have the adjustable baffles worked out for you Highbeam? Does it seem to make a difference? Does the center of the convection deck stay...
I got my NC30 going good for the first time last night. Set off the smoke alarm twice from the paint burning. Had to choke it down to stop the...
I think I have secondary burn. Starting to smell the stove and pipe paint burning off as well. Starting to throw off good heat too! Very...
Took an extra day but finally had the inaugural lighting of the stove last night. While installing the junction box for the rheostat a chunk of...
Tonight I'll be doing the electrical work and wiring up the blower rheostat on a wall plate in the wall to the left of the stove.
The pictures above of the stove set in place are pretty out of date. Since then, I have removed the pedestal and installed the legs. I've added...
Yes, I purchased and installed the side heat shields and the stove came with the rear shields. The cement board is spaced 1" from the exterior...
Chimney is finally complete. Hoping tonight to finish up a few small things and light it up for the first time! [ATTACH] [IMG]
Got the stove and set it in for a test fit. Will be installing the feet before final install. [ATTACH]
