I want one that mounts on the wall and you pull down on the handle. But man, not 200 bucks of want! Current system of hatchet in the bench vise...
Good point Paul. I just remembered that mine gets full back there also. I made a “T” looking thing out of a couple pieces of 1x2 wood to reach...
Yeah lukem. I know what you mean. I drove the tractor around outside the slab I’m building on last week during the thaw and tore the mud up. I...
Start of season (first frost to kill bugs) Tractor with carryall loaded on rear and full totes to porch and woodshed close to house till full....
I have a 20” on a 261. It’s my favorite for limbing and working stuff laying on the ground. Easier on my back. That 250 will wake up a bit with a...
Another piece of 3/16” plate here. [IMG] Even with the custom place to clamp the ground clamp! It’s on sawhorses, this rolling wood rack, and the...
Got back from a work trip to Dallas last night. First coffee in and heading out to shop to fire up the WoodChuck. 25 degrees here and it’s been...
While you guys are talking, what’s a good older used saw to watch for to use in a chainsaw mill on Craigslist or FB? I have a chainsaw mill still...
Ernie, I didn’t use that bracket but used a 45 degree elbow to offset the pipe on my shop. [IMG] Edit… after looking at the picture I should have...
Speaking of enablers. It’s a steep slope. I innocently asked about a good replacement chain for my MS250 long ago here. Now there are 3 saws, all...
Point noted on hitting the horizontal board at bottom of cuts. It did cross my mind. Mine have some bite marks I admit. I tryed the “stop” end...
Good morning fellow New englanders (everyone else of course) Flew to Dallas Monday for business and the rental car company told me to pick what I...
Kevin, what mods are you planning that you mentioned? After using mine for a year, here’s some thoughts (overthinking thoughts) after studying...
Nicer than mine [IMG] [IMG] I’ve been wanting to build a table but haven’t needed it really yet I’ve found. Sent from my iPhone using Tapatalk
I have to say that mine isn’t exhibiting the problems mentioned in this thread so far. I turn the thermostat on after I load and light the fire...
I have a gas pump that I’ve moved from place to place for 20+ years. There a story there. 3 divorces, a cabin on pikes peak, a houseboat in...
Thanks for the info. I was wondering if wood consumption would go up. I was hoping it would work kinda like you guys with the outdoor wood...
Well, I want to give all of you guys a heads up in order to avoid getting into trouble with the missus. As my wife and I were walking our 6 year...
My reasoning is that it can go from too hot to chilly in the shop. I want to try filling it up with the good stuff and let the thermostat and...
Picked up a bunch of organizer bins at harbor freight to attempt to clean up my coffee can, plastic packages, cardboard boxes, pile of mess nut...
