My experience is about the same as your Quad. I had plenty of coals this morning. I had to let them burn down BC I was working on my draft plate....
-15 last night before wind. Full load at 8pm. House at 70. Woke at 8am (day off, needed the sleep) to 65 - I'll take that anyday. Furnace didn't...
Already done. Waiting a solution. WS has a new plate coming to my house. I'm just not sure that's going to take care of it. We'll see. Just gonna...
I found out that there is a "floating separator" between the primary and secondary air intake. It is able to float 1/4 inside a vertical track so...
What's yours look like underneath? Metal scraped off or not?
Brand new engine? Hope not!
Ok, then I have an issue. ..
Can any of you check under your stove to see if the primary air slide (front of stove) has paint scraped off like the pic in my post. My slide was...
Linkage rod is straight. It seems to stick like there is some kind of grit holding it up inside the slide. I noticed that there is paint scraped...
I haven't had all that much opportunity to try out my new IS. I've noticed that if I engage the cat right when it gets to 250-300 on the Single...
And not only did they send me a stove, but a fort for my kids to have hours of fun playing in (the box/cover:D).
Yes, the manual says to put it there. I have another rutland thermostat that is actually quite accurate on the pipe. The Woodstock is on the front...
Right now, she is cruisin at 500 on the magnetic thermometer (1000 cat temp right?) from Woodstock on the front by the hex bolt. I tried putting...
Where does it get hotter and where should I put the magnetic T-stat to see the temp? I put one on the back of the stove, and I've also tried the...
Loving this stove so far. I haven't engaged cat yet. I'm on the 2nd breakin fire and I can already tell its gonna work well. I've never had a...
Not supposed to be camo, but now that you mention it. It kind of does look like it. Stained concrete tried to make it look kind of like stone...or...
[ATTACH] Lookey what I dragged in last night. Couldn't have been easier back up to door, pull off trailer with pallet jack, set in place, pull...
Sorry about that..I totally misunderstood your post to say that there was something wrong with the door or gasket material. Makes sense now.
I may have missed something, why a new door? New combustor too? Is this under warranty? Are they taking care of you?
Could the same thing be achieved by leaving it open 1 notch or does that leave the secondaries open?
