When I bought my 660 it came with a full skip square chisel. It took me a while before I found the right file, Vollarbe flat file-six sided, to...
At these events, what type of chain do you use? Racing chain? Square chisel?
The real work starts after you turn off the saw! I've heard that a few times and it's true. Splitting wood with a hand maul will get you in...
Last time I ran my ported 660 was a little over 3 hours and only taking breaks for refueling and adding bar oil. I use a 28" bar and isn't that...
I agree but HP = speed....torque x rpms being part of the formula. Not doubt, the 660 has more torque than the 461. I can adjust my rpms close...
My 660 didn't stay stock long. I agree if you're cutting 20" wood or less go with a 460/1 or smaller.
[ATTACH]
Yes...after increasing my computer's resolution it was visible.
Thanks for the pic.
OK good to here. Thought I needed glasses for a moment.
Was it oily or do I need glasses? Last time I looked inside my 660 a large film of oil was present on all metal parts.
Doesn't look to oily? After running Motul 800 in my 660 and 036, looking at the piston and cylinder wall, it's COVERED with oil. I mix at 32:1.
I had a Stihl 390 for over 8 years. It was dependable but lacked in the torque department for me (bogged in larger wood and cut slow). I sold it...
[ATTACH] Also, the Motul 800 off-road is cheaper than Stihl Ultra.
Listen to KG461. Two-cycle oils, the ones that are submitted for lab testing, have the following ratings from lowest to highest (best): JASO-FB,...
I have a 92' Z-71 with a little over 206,000 miles with the original transmission.....no issues...knock on wood. I remember my Forestry professor...
It's definitely more challenging to hunt squirrels with a 22 rifle rather than a shotgun. It also improves your shooting skills before deer season.
Randy, after you received my 660 I remember you telling me mine had a "good jug".
Chad, I really thought the 110 would show an advantage due to the high compression of my ported 660. But it didn't. Looks like a slight advantage...
When I tested the 110 octane vs 93 octane in my ported 660 the 110 octane cut close to 10% faster. The saw was tuned for 110 at 13600. When I...
