I found that manual online. Mine seems similar but maybe not quite the same. How do u drain the oil?
Just ran the model and serial numbers for my splitter and no manuals available online.
Pardon my ignorance but how do I remove this bolt?
As far as I can tell there is no dipstick or drain plug for the hydraulic fluid?
Where can I pick up a hydraulic filter?
I have an MTD 27 ton splitter. I bought it from a buddy last spring. I'd like to keep up on the maintenance on it as I need it to last a long...
I would say you'll burn 5-6 cords at a minimum. My house is a quarter the size of your living space and I went thru 4 cords last winter. I burn...
No worries man. I filed down the husky roller a hair on each side and it fits good now.
Ok so how many strokes should I attempt to do on each tooth? I did 10 strokes per tooth earlier today and it still didn't cut great. Better but...
A maintenance sharpen is nothing but when the chain has been rocked or touched steel it's a whole nother story. I measured the rakers and they are...
Thanks. My biggest frustration tho is having 2 shops sharpen these chains with a grinder. They should be as sharp as they are outta the box after...
Here's mine
It's a standard/non narrow kerf.
I was able to file it down a bit so that the roller fits on the top of the chain like it should now. I was able to make 10 strokes on each tooth...
It's a .325
I think mine needs to be filed a bit so the roller can sit down further on the chain. What do the arrows mean?
That pic sure looks like the guide is not sitting all the way down onto the chain but the slot on the other side of the roller is sitting all the...
I read plenty of info online before I bought the husky roller that it would fit a stihl RS chain.
.063
Either way I put it on the file does not fit inside the tooth
