I think I’ve got it worked out now. Saw has good throttle response, slightly 4 strokes in the wood and the chain barely moves at idle. It may be...
No
Ok thanks. I did retune.
Ok so I drilled 2 more holes in the muffler. One above and below the stock hole. Seems to run better. Is there any use in drilling holes on the sides?
Anything I should know before drilling into the muffler? Just 2 holes on the outside?
Thanks for the suggestion. I may do that. No issues tuning after a muffler mod?
Thanks guys. I don’t think it’s a compression issue. Piston looks fine. I may have a shop look it over.
I recently bought a used ms260 pro a few months back. Saw is in great shape but I can’t seem to tune the saw correctly in order for it to idle...
That was my problem. Thanks.
Any chance it was because I didn’t put the muffler back on correctly after I took it apart? I had read on another forum that if u don’t put the...
Just bought a 260 pro yesterday in great shape. I tried tuning it to the best of my ability today but I noticed the muffler gets extremely hot. So...
I’ve burned Eco bricks and Envi blocks in the past and those are both very good products. A little expensive but if you needed dry wood in a pinch...
Prob ok stuff but I only run stihl oil thru my saws.
.325 runs just fine on a 291. I wouldn't change it.
Same here. No mention of any stabilizer.
I didn't realize the HP ultra had stabilizers in it. Good to know. I always add a little seafoam to all my gas cans when I fill up and when I...
The M tronic would be worth it if you don't want to have to deal with adjusting a carb. Having said that the CS 590 is a hell of a saw for $500.
I have an 021 as well. Great saw. Cuts thru everything I need it to.
I agree with you. I have an 029 super as well that I bought used for $100 last summer and I've cut close to 10 cords with it. Great saw. Super...
Clam shell design is typically seen in homeowner/farm saws where the jug and piston sit in a plastic case. this makes it harder to rebuild and...
