This is the DT pipe with 3” outside air line
ty sir. I’m trying to figure out how to connect the outside air now. I have Selkirk DT which bring the air in and heats it before getting to the...
Old I believe
And the biggest culprit for leaks is where you secure the adapter itself to the stove. How did you install the adapter
Look closely at where the T connects to the adapter. Doesn’t look like it’s in all the ways and interlocked
Thanks TPD.picked it up for $200. Stripped it down and repainted it. Replaced every gasket in it for about $150 and it’s burning like a champ
So I just installed a quadrafire cb1200 in my basement over the weekend. I have an xxv on the 1st floor but it’s hard to do any testing in that....
I will for sure. Probably won’t be for a few days as I have some okanagan Doug fir in the stove right now with this cold snap fir the next few days
I was driving through Mansfield today and picked up a couple to try. Pellets are in the small side. 1/2” to 3/4” tops
Just on my way back from church and I had that same thought. Will mess with it some today
We have fire. Really lucked out on this one. Exhaust pipe off the back of the classic bay stove is just about the same as my previous Advance so I...
:popcorn:
Yeah a crazy mark up for sure for a little plastic bushing. No goo on the pipe. Just silicone tape. It’s in there pretty good. I’ll spray it every...
Question. So I have Selkirk Dt venting already in place from my last stove. I’ll have to install this with the pipe at an angle cause the vent...
$5 cheaper at ace too for the RTV. On another note I was missing one of the plastic bushings for the hopper lid. Cheapest I found on line was $27...
So I took a coat hanger to the tube if rtv that I got from the dealer and while it’s soft towards the tip it’s still on the bottom half. Went to...
the caulking gun has the plunge rod on it for breaking the seal. When that yielded no results tried a long thin screwdriver and still no go.and...
Things were moving along really well until I went to do the door gasket and ash pan gasket. Bought a tube of high temp red RTV at the dealer on...
Started putting things back together today. Installed both blowers with new gaskets and burn pot with new gasket. Made sure the thermocouple was...
Worked on the door today.Pulled the door gasket and while I was in there I figured I’d do the glass gasket too. I’ll take the door with me to work...
