Picked up some saw work from an Amish Welding ,and Fabrication shop . He picked this up cheap in “ as is “ condition . Gonna need a piston ,and...
Daeven , Sorry for your troubles with this saw . I’d also do as Chud said . But , I’d also take the saw to the servicing dealer . That 4 week...
Seems like you have a wonky carb . It could also not have been set up properly . The CS 590 has a walbro 268a carb ,and itsets up a bit...
[ATTACH] If ,you haven’t done so . Take the cover off the oil pump / clutch chamber ,and check the condition of the oil pump drive gears . The 028...
You can probably get away with a slightly larger bar using skip .But not anything really large . Remember , skip is not 1/2 the amount of cutters...
Never , unless they are bad . I’ve not had one fail in any of my saws ,and rarely in saws I get in for work . I did encounter bad new plug ....
It’s never failed to split what it was fed . I’ve had everything from maple to old locust on it . I did eventually put a pressure gauge on it and...
I have had a 25HH with lift for about a dozen years .dead reliable, solidly built The only thing that I didn’t like ,and changed later is the...
Bogging on acceleration is generally a bit lean on the L needle . Make your idle adjustments before setting the H side . There are tons of you...
Well heck ! Lookey here ,a chance to spend someone else’s money ! Ireally like the 350/346 idea ! Makes a great saw . But , I’ll recommend the...
^^^^^ This . Regular grade gas is about 83 octane without ethanol . Premium is around 87-88 .
Try this place ... Surplus Center look at the valves you think may suit your set up . Call them ,and ask for their guidance on the subject . Also...
Don’t tell me he was running it without the rim sprocket ...
Was finally able to find time to really run the 462 . Sweet saw ! Was surprised that when noodling the rounds ,the cover never clogged . A big...
25ML per liter will give yo 40-1 . Premix Calculator
I’ve got one of those . Kinda disappointed in it .Can’t read the numbers on it as that Ratio Rite logo is Way too big . . . :whistle:
What Kevin said ! I run a sort of compromise mix in mine at about 36-1 . That keeps the Auto tune/ M-tronic saws happy ,as well as the 390’s...
Installed a 3rd function set up on my FEL today . Went well. Now to get the grapple made . The kit is made by Land Pride ,and was made to fit my...
I do get a few chains that the file just chatters over . It’s especially noticeable doing rakers . Rotary chain seems to be the worst offenders .
As an afterthought .... While I am spending the OP’s money ... while you are at the ECHO saw Emporium , and bearing in mind the cost of the CS620...
