Nice! I almost bought one a year ago. I walked 10 feet away at a flea market & when I turned around it was sold. I'm too ashamed to say what it...
Ok, I managed to pry up the bar plate & the oil feed slot was half covered. It is drilled. It looks like they were using the bar oiler, don't know...
Thats my saw with the exception that I have the oil filler cap. I believe mine was a chainsaw engine that just had a cutter arm installed.
Hi, sorry for the delay. I will load a picture of the tag. It appears to be a 3120XP chainsaw engine that Racine just put a cutter arm on. It has...
Hi KRL, This was on a Racine circular chop saw(rail cutter). There is no hole between the bar studs & a large mount bar fits fine. This has an oil...
Hi, This doesn't have either. It was on a rail cutter so maybe the carbs are different? The only adjustments are speed & low mixture. The saw...
Thanks very much, maybe now I can get this running, Randy
Both fine saws. I would & did take the Husky over the Stihl in that engine size. I missed my 371 & the 372 was even better.
I like the spring type. Rubber elastomers degrade & don't hold the balance. Its just one less thing to go wrong with a saw.
I have a 3120XP(don't know the year) power unit with a bad coil. This has the 3 bolt coil. All the aftermarket coils I see are 2 bolt. Will they...
One short burn a week to heat the top of the tank. Won't be long till I'm throwing in wood like an old time coal tender on a locomotive.
A ring that has lost tension will also give poor compression. If you pull the jug & everything looks ok the ring probably has failed. Put in a...
I would do that Fred, as others have said they can read low....as I found out with a VW diesel many years ago. If you have a good accurate read at...
Pull the muffler & look at the piston. If the Hyway wasn't chamfered at the ports it might have seized the ring. If you are using...
Nice, It looks like it was made to last a long time.
Isn't Gedore an owner/part owner? They are a giant in the tool making bis.
Oschen(ox) kopf(head). Thanks, it is working well. It has a good geometry to it. I'm going to file/hone the edge to see if it will bite into the...
The Pa-80 is advertised to have a 6.6lb head. This has a pretty beefy handle so that will ad some more. I don't have a decent scale to measure...
The pickaroon was from Baileys & was shipped from Germany in about 2 weeks. The customer service was superb. The pickaroon is very nice for the...
Last I heard Neeman wasn't even taking orders for most of the axes, he couldn't keep up.
