I made a portable c-clamp vise with open cell foam stapled to the bottom of the noodled slab. It stays put and doesn't slide around on most...
When I was in Germany back in the 80's, most of our German friends had massive masonry heaters in the middle of their homes. From what I...
I'm liking the better control over the fire and the longer burn times it has provided for my installation here. But at these temperatures this...
Unfortunately that is not the one I need for this saw.
I'm working on a few saws for some of the guys around here. I run into all kinds of issues as most of these saws are rode hard and put away...
That's the right price for me!!! LOL And I need all the POWAH I can get... I'm a low budget kinda guy...
261???
Checking back in after almost 3 weeks of burning with the barometric damper installed. I am getting longer burn times and have much better...
I haven't yet checked the chimney for creosote, but I can't imagine it's loading up a lot. Everything is burning nice and I can run it at lower...
a dirty water pump, a Poulan / Craftsman saw, and a Husky in a box... And way over in the corner is the missing circlip that sprung out of the...
I'm right there with you on getting out from under trees with dead limbs. Lots of times I'll put a bull rope up and cut till it's almost ready to...
I reloaded the stove with a full load of Cherry, Ash, Sugar Maple this time at 7 hours after this mornings load. Flue temp was at 200* and there...
4 hours into the burn from post #89 above. I raked the coals to the front, flue temp is just under 300* and went to a little over 300* five...
3 hours into the burn from post #89 above. Secondary flames are out. Mostly coals and charcoal at this point. flue temp is just under 300*. I...
+++++++++++ +++++++++++++++++++ No visible smoke No noticeable smell downwind A little visible heat ripple Flue temp at wall thimble above the...
So far, so good. Put in a full load this morning and let it get up to 600 then closed the primary air. At 1 hour into the burn, the baro damper...
We've had a couple days and nights of unseasonably warm weather. With the barometric damper in place it has reduced the draft SIGNIFICANTLY on...
Did that happen while running and suck your coverall in? Or while starting?
Glad you were able to figure that one out... Carb issues are always a bear... unless they aren't... :doh:
I'll keep an eye on this aspect of the install as well. I do have a chimney brush and can easily clean my chimney out side from the ground....
