so? [media]
8.5 degrees here just fired up a full load
Thank you much... trying to figure out my burning. Have wood at 18% moisture and can't really turn the air down farther than 1/3 open... been...
Does the length of run of the oak matter?
Chris nice springers... got one myself
no idea what type of wood...southern wi on where it was from.
Well here are two logs I split and took moisture readings on. Both come in at 14%. I got a half cord of this stuff for free this past June. It was...
We are fired up tonight....35 outside 80 inside
Dealer came out this morning. Look things over and admitted it was not sealing tight. Took some pictures and was going to order some new gaskets....
I ended up going with a ZC fireplace. Was in a very similar situation to you. The wife had the same questions and wanted the larger viewing area...
Ok played with the gasket a little. Started fire at 10:26...First video 45 min dialed back to about a quarter open. Second video 15 min later...
Have the shim washers removed....all but one of them as it states one must be left in place.
Ok....took the doors in yesterday. There was a screw that held the pin on the hinge that was loose allowing for the play in the door. Seems to be...
Had it installed last December, had the company come out and replace a door latch as the nut on the end was stripped. The guy was going to order...
I'll snap a bunch of pictures next time I brew.... Pretty much do all grain except for 1 wheat beer that is amazing as an extract.
Here it is if need I'll snap a few pictures too. Supposed to take the doors in tomorrow, but not sure how that is going to solve anything. The...
Well here it is. Got a Nut Brown, Oktoberfest, and a German Altbier on tap. All brewed about 2 months ago.
Guy that sits in front of us at the games is on the board of directors just had to snap a quick picture of it.
Here's a few from around Wi, and one from Mexico this spring.
Here are a couple of pics hope to finish it off this winter sometime
