My compression tester from Advance Auto had the 10mm adapter for the 550XP/562XP as well as the regular auto ones. The size I use the most is the...
While I'm at it, I need to write about a previous generator experience 10 year's ago. There's a misc. junk/hardware/surplus store near my house...
I had wanted a generator off and on ever since the blizzard of '78. I had an event last spring where the power was off for 8 hrs - 4 of which was...
I've had this one about 5 years and it has always worked perfect. I have compared it with other testers and got the same readings.
I have several work benches and a couple are 1/4" steel tops. The one I use the most has 20 gauge galvanized sheet broken as in the first post....
Often times the old wax based condensers dry up. There must be at least a hundred threads on the Internet about the points type 031 not having spark?
I have a ported 026 PRO. It won't beat a 346XP or 550XP in timed cookie cuts but it is just a sweetheart to use. A very likable chainsaw
$2.99 http://www.harborfreight.com/4-3-4-quarter-inch-multipurpose-magnet-holder-1938.html
The most effective, cheapest, and passive dust collector for your chain grinder are a couple big magnets setting on top of the mounting bolts. I...
I have three of these saws and all are 025 or MS250 and I also have a extra engine unit. The original muffler on the 025 was two piece, held...
Old design two strokes have a more pronounced 2 stroke - four stroke sound than the new strato charged engines. The optimum power versus cooling...
This site should be good enough?
A guy sold me a right new Husqvarna 350 for $120 because it was doing this. He had two new .325 chains for it and the presets in the chains were...
If you hit a nail or had some sudden stoppage, the crankshaft can twist at the crankpin and you will notice possibly both flywheel and clutch...
You need a big bar and chain and lay it across a big log to help support it? I'm sure it would feel right at home on a 48" ?
I don't do nothing. I buy my gasoline from the cheapest discount gas station and mix my Pennzoil air cooled 2 stroke in the gas at 32:1 - Run the...
I have a like a dozen of the non XT 362, 365 Specials, and 372XP's and only one 365 Special has this bushing (M-14). All the saws except for the...
You learn to work with what you got. In frustration, you may devise something different?
Yes I was catching the variations upon close checking with the file plate witness marks. Then I would try to correct and worry about consistent...
What I feared, early on, was maintaining the top angle using the guide plates. I tended to be off a couple degrees from left to right. Didn't...
