Thanks, Yep, I kind of like those red knobs
Good looking stove, I really like the door.
On the fire brick for baffle, which may be the ticket, I might suggest, to think about protecting the bricks from being hit by a stick of wood...
Your Momma bear looks just like mine, and my stove only has the bottom row of bricks, also. But I see in the manual where it shows a second row or...
OK, here's my latest pictures, showing the panels with the spacers.[ATTACH] [ATTACH] [ATTACH]
Thanks,
Not really, although I like it. It's just the color of left over sheet metal I happened to have on hand.
Ok, so I will end up with sheets spaced out from the wall, with a slightly over 1" gap and 4-1/2 ft high. I am using double wall insulated stove...
I am not completely done yet, but will finish up fairly quickly, hopefully tomorrow, if I get to work on it.
Well, yes I could take it back down, but I just don't want to, as I like the look of it, and want something covering the wafer board but it would...
Wow! I thought surly I would gain something. Ok, if I build another short wall, spaced out the min. 1" or more, and about a foot higher then the...
Ok, I don't need to get that close. And my sheet iron is mounted hard against the wall. I don't want to change that, now. As is, have I gained...
You can see that I am currently closer then shown in the manual. I am currently 28 from the back of the stove to the wall, and a little over 32"...
Ok, one more question, rule of thumb: I lined the corner in my shop, where I am going to install the Momma Bear. I had some 26 gage corrugated...
Yep, I would think that would be a must do thing.
Ok, I watched a few videos of secondary air tubes. I get it, now, how they work. It looks like there is lots of experimenting going on, and lots...
Ok, thanks
Sounds like a good idea, but I guess I have not really paid much attention to any stoves like that. I am sure I could do it, if I seen an example,...
Interesting; Would that smoke? I have heard of doing that, but I am not sure I understand the concept. Or are the holes just in the end of the...
That's a 10" wide baffle plate, on about a 45 degree angle. I didn't choke it off as much as I probably could have. Should I put any small holes...
