[ATTACH] [ATTACH] [ATTACH] [ATTACH] A McCulloch 10-10S is currently what I’m working on . It doesn’t look to have a ton of hours . But it looks...
Just brought home this freebee . Ran when put up according to the owner . [ATTACH][ATTACH][ATTACH]0
it had very little wear on the spur sprocket ,and didn’t have much dirt,etc. under the starter cover . So, I’m guessing it wasn’t used much, was...
Just got this Poulan running for a local farmer . He picked it up for $10 . Needed a good cleaning ,fuel ,and vent lines ,and the muffle opened up...
Their not a 562xp ,or MS462 . But, they’ll hang with most other 70cc saws . They have a real nice ,and forgiving power band . I now have 3 of them...
Picked this up at the local Husqvarna shop .For FREE ! Don’t know the history . But it was sold from a shop that was right across the road . It’s...
Just a guess ,and prediction ..... But, if you are like most of the rest of us here , You will need a bigger set of shelves in a surprisingly...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Got this dissected ,and AWP . Poulan 245A ,74CC’s . Interesting Flywheel/starter set up . The...
The ones I have used were from Stihl saws . And , they were saws that I never ran before. So, I could not give you a comparison . The saws did...
The exhaust exits onto the cylinder heat shield right where it wraps around the muffler on the clutch side . The hole is very tiny ,and it’s hard...
You definitely gots Some of that WOYB . But it’s not to bad yet .... There’s only one saw on the bench all torn down . :D
Bar tensioner . Simple saw to work on . What caused the scoring is Likethe impulse tube . PN 530053435 .It’s a little green piece of silicone...
I’m keeping the 10-10s ,and the 031AV . They came in a pile of saws that a guy wanted rid of . I also got a Shindiawa 488 from the guy . All the...
No!!! I do have a box of mini macs that I would be willing to part with . How about $20 plus shipping ? I can’t afford to pay more than that right...
031 AV . Just cleaned the jug , sanded the piston ,and put new rings in it today . Got a carb kit for it , and am awaiting some AV mounts .
If the springs are not allowing the clutch to engage at a lower than normal idle rpm then ( lost their temper ,and strength) , and it engages...
Just an opinion , but...You’d likely be better off buying a decent timberjack with a removable stand . That way you could also use it as a cant...
Well this is what’s on my bench ,awaiting parts . Except for the 10-10 ,it’s awaiting a tear down . The P&C is scored . Need to find out how bad ....
