For loader style work hydro is great. for pure grunt work gears stand out. work means heat , hard on hydros unless properly set up with large oil...
used tractors be like used cars. dealers might pretty them up some but do squat for any problems.
cull logs _ to many knots , splits, external damage, internal damage, not straight enough short of 101" ect. Mills can be picky. I was told a...
cull logs _ too many knots , splits , not straight enough, damage, short of 101" , that covers most of it. mills can be somewhat picky. I was...
could just make a sleeve of the correct dia and length and use a standard bolt. saves trying to find something unique to the unit.
red neck version - but I use the pellet gun on the screen. use a sooteater bottom up about midway through season.
have friend with a new LP hot air furnace experiencing roughly the same problem. At least his is under warranty but being in the boonies service...
took awhile to find the computer glitch, solves that. minor alteration need on adapter plate, couple quick clearance cuts on the lathe solved...
somedays i just hate this box, trying to send revised invoice to customer and the dang thing keeps blanking out who it goes to, no problems...
Just heard the frenzy part from one of my customers, landscape firm sells firewood this time of year. He was saying that he will have to...
there is a pallet company on my way to my shop. somedays with wind from south to north you can't hardly see the freeway. must be timed just...
well there is always a chain and a big block of steel attached to one end to drop down on it until it comes loose or breaks up. if feeling...
I blame Commiefornia for most of the outdoor heater bans and various progressive desk jockies in state and local gov. I heard on there that...
2 screnches and nuts in truck
with all that weight in one location might want brace the floor from below.
Start windings/centrifigal switch is likely culprit, area might just be gunked up with residual saw dust leavings. Start cap. is always a good...
Govt built whole neigborhoods out of block built homes after ww2 and Korea for returning vets. I do not remember all the details anymore....
6.7ford diesel timing gear on crankshaft is just a heat shrink fitment, no pins or key way, they slip and then your timing is off but the gears...
Toss down the back stairs to basement . fill the whole thing up to sill. then go around and open inside door and stack it. due med problems i am...
I have an Echo Bearcat SB5670. Honda 20 hp chipper shredder, stand alone unit , chipper portion 5x5" intake, shredder up to 1" branch size this...
