FWIW, the chain in my videos was just RS3, and had done some other work since it's last sharpening.
I think that's mostly issues with blurring in the video. It was the same B&C, the first cut looks dustier, and I doubt it got sharper along the way.
Here you go. First video is a stock KS 044 with freshly rebuilt carb. That saw went to RJames, who's been very happy with it. The saw in the...
I have read in multiple threads on AS, though again without much substantiation, that the angled-fin Mahle cylinders used on early 12mm versions...
Port timing is beyond my level of understanding. How does that play out?
I also had two 044's at one point, both 10mm, one KS and one Mahle, and cut successive slices off the same tree trunk with them. The KS performed...
A lot of people on AS think so, but I haven't seen it objectively substantiated.
Put a straightedge against the piston vertically, on the intake and exhaust sides. When I rebuilt my 044, the original piston skirts were so worn...
Probably worth stipulating that starting at the top and then finishing the cut from the bottom presumes that the tree is supported at both ends so...
This seems like a good place to plug a book I got (by request) for Christmas: Jeff Jepson's To Fell A Tree. It's very readable, with plenty of...
Duh, that's why the tank is under the muffler.
Yeah, I skimmed past Ralphie Boy's offer. You aren't going to do better than that.
Unless you want to get into the hobby of fixing old saws, I would not recommend used unless you buy from someone you have reason to trust. Most...
I use a piston stop regularly, but it's the plastic one that slips in through the plug hole and reaches all the way across to sit up against the...
Fairly easy to split, dries very quickly (one year or less), neither stinky nor especially messy. I like it.
Yep, for smaller, currently-available parts eBay is often a bad deal unless it saves you a long drive.
Having tried a lot of saws over the last couple of years, my 044 is the only one I'm sure I don't want to sell anytime soon. I suspect you'll...
Yep, it'll be a an orange plastic badge with two pins sticking out the back. The only time I bought one it wasn't a snap-fit and there didn't...
That's just going to say "Stihl" on it; it's not specific to the 044. The old metal tags that said 'Made in Germany' are NLA so far as I know,...
No, it comes down from above. It's still a pain, but at least gravity helps, and it's a shorter distance than from below.