HMR in the savage , have one. At 25-70 yds in drops ground hogs on the spot. just fall over dead. There is only so much room in the case of...
i but a ball on my garden tractor.... works well.
These are pricey but are the most comfortable and highest DB reduction available. Finding a dealer can be tough though.. i have two pairs, on...
its a polymer, my understanding is its mixed with water into a slurry and dries by evaporation, they apply 3 times to build their coating up, then...
This is the only company i buy from for pistol bullets now.... theyre just that good. The Blue Bullets 230 gr RN 1.23 COL 4.6gr HP-38 Winchester...
Heres my 1911. I run this gun in USPSA single stack . Its a commander length Ruger SR1911 that isn't really much Ruger anymore. Has an Ed Brown...
And what projectiles are you using?
swap the front wheels side to side, differential wear can make a difference in subies...
Broken transmissions are expensive, crashes from being overloaded and not having enough brakes sucks too....
I think the biggest consideration on your decision is; what tow vehicle will you be using. if it's anything lighter duty that a half ton truck...
Beat me to it....
Horkn saw this sticker today. [ATTACH]
my 400 is my favorite saw too. the 670 is a beast but too heavy to be an all day saw.
A properly done paper joint gets its strength from the WET bond of the glues in the compound with the paper. Works very well. the fiberglass...
Completely disagree.
wild viburnum?
the mud will stick without sanding. promise
Yes, priming before finishishing drywall will hurt nothing, good insurance policy.
the latex won't stick to the old paint. it needs primed with oil based primer then a topcoat of latex. I'm a contractor, I like zinser cover...
I hate you