Try to get it for less than that... theyre going for 200ish around here on c-list. Good stoves for sure.
It sounds like we lucked out with our run of Hyways. The later versions weren't as nice I guess.
Yep... are they back up to original price? Or some happy medium? I haven't checked my local dealer in a few months for their latest pricing. I...
Before the price decrease, I'd have said Meteor. Since the decrease, Oem isnt that much more. I still use meteor a lot, though. $38.50 for a...
There may be, but not drastically enough to cause major weakness or failure. Corrosion, naaa. Maybe after a long time? But then again bearings...
I think theyre steel, so yea, harder than the head. I use timserts for m5 and love them. I couldn't justify the cost for the other common sizes...
Should be fine. Double check the directions, though. Im not sure if it's more of an adhesive need or to ensure no leaks. Probably both?
Re: save-a-thread I've done one of these so far. Take your time with the tap and use a good quality sealant around it. I used Dirko I...
Re: your piston question. Many saw guys simply put in a new piston if there was any excessive wear on either exhaust or intake side. With the...
Had one at our cabin. Cut a lot of wood but then developed a massive air leak and other problems so we parted it out. My Grandfather bought an 036...
I like it. You could always sell a bar or two on here to help offset the cost.
Ahh yes, the baffle cracks on Travis stoves. My recommendation is the same as above; a competent welder can fix those up. On my Liberty, I took...
This Lopi has a deeper ash lip than other Lopis and Avalons. It can hold a lot of ash.
To further the confusion, most agree that shorter, hotter fires result in nice heat transfer to the room and less coaling. This requires...
**a bit anecdotal but widely accepted by most burners** In an EPA secondary stove, achieving a high firebox temp that starts secondary combustion...
If you're going to replace that stove, put in the biggest stove you can afford. Anything under 3.0cu.ft and you'll be disappointed. I have a...
We used wedge bolts and tapcons.
I like it a lot. Id say its best features are the firebox size and that bypass damper. It helps the reloads and cold starts, that's for sure. It...
Bump
Check out my Lopi Liberty basement thread. I used concrete to fill block cores, then sleeved it with a piece of stainless and used good quality...