I’m trying Dirko (high temp rtv-like silicone that Stihl and other companies use in engine components) this year. I’ve used Rutland gasket cement...
Nice. Keep that guy’s contact info around. Most small shop or hobby guys have reasonable labor rates and actually like building/fixing saws. He...
K. I should have 3 left. Nos, oem.
I had an ebay listing up for nos lines ... didn’t realize it expired. Price was $3.50 but you can have one for free if you want.
Use an insert-type fix if you can. Timeserts are great but expensive for the kit. I only have a m5 kit so I went with the helicoil brand “save a...
Some *aftermarket 1127 carbs had issues with the H not leaning out.
My meaning was that I would buy an AM carb AND rebuild the oem with a decent kit... making two carbs for that saw.
Haven’t had any experience with this brand up here. It appears to be a decent stove but that goes out the window without reviews (especially when...
Yes to oem hoses, not aftermarket. Some 1127 carbs (290, etc.) had an issue where the H would not lean out. The saws would run rich at around...
Agreed. Bonnies loss and this news—/ makes for a bad sports day for me.
The design of these stoves just makes sense to me. Everything up top is removable and replaceable. The brunt of the heat is on the firebrick (not...
I have an Avalon 1750 which is the same parent company as your Lopi (Travis Industries). My stove is freestanding and does not have a bypass. My...
I may have a few 1121 lines left over. Will check. I agree with Dall, go oem on lines when ya can. I have handles, smalls, and air filters, too...
On my Liberty install I sealed each joint that I wasn’t planning on removing with the high temp sealant. Rutland?? Not sure of the brand now. It...
If it’s a saw you’d like to make right, then go OEM or higher quality AM like what’s posted above. The cheap eBay kits are inconsistent... but...
[ATTACH] Woodshed 10x40 build I’ve added fascia and a few other items since this post. I filled one bay completely and have used 2 rows so...
Agreed. If you want a project then put that on the shelf for a rainy day. I’d give ya less than $50 for it with low comp and a known scored...
Still a bunch left. I’m hoping to get some listed in the coming weeks.
Oil caps so far... that’s it for 1106 part #. Anything in particular that ya need?
Will check.