I’m far from an expert but do have one build thread on here for the Liberty: Lopi Liberty Basement Install I don’t have a thread on my upstairs...
Home Depot budget should be fine. If you can scrounge lumber and screws, then most of your cost will be for the surround stone, hearth surface,...
[ATTACH] The Liberty is pretty darn close to a match.
Good work on that stove. Travis Industries (Avalon, Lopi) must have really liked that style Fisher.
eBay bearing shops are the way to go if the local guys aren’t open or don’t have it in stock.
Dang good deal there, man.
Possibly... check the basics first and expect to get into the carb.
Good saw for sure. The AM has a few decent parts for this series. Avoid AM cylinders. The handle looks bent.. some AM handles are ok for average...
Good stuff. Not too bad, right??
I use it. Good oil for sure.
Cool... they’ll like it. Remember the coil lead configuration and get some Dirko for sealant. Don’t trust the block to be sealed perfectly; look...
I also rebuild carbs, do muffler mods, and inspect everything (bearings—-plastics) during top end rebuilds. If the cylinder is badly scored or...
Not terribly hard to do, but tricky if you haven’t done an 1127 series saw yet. If the piston still has machine marks and isn’t scored, go with...
Nice thread and great pics! Good to know parts are replaceable for this series. That does seem like a lot of damage but is still fixable. My...
Dirko looking good after 3 months of burning. The real test will be how it looks a year from now.
I personally wouldn’t mill with the 291. They’re decent firewood/“ranch” saws, but would struggle milling. A used big saw is usually the way to...
That’s not good. Anything can be fixed, but unless that part of the stove is designed to be sacrificial, I’d say that damage is extreme. We have...
Cut-up clutch cover, either roller or no chain catcher (dedicated noodle saw), and only a small inner spike with the points ground down flush...
Not defending them at all, but I’ll add that they’re a liberal Mennonite business and their computer skills are...well...developing at best.
Yep, I know the previous owner of this shop. The new owners are using eBay and Craigslist to expand their footprint and try to move inventory....