I cut six maple sticks, 3 - 1/2"x 6" and 3 - 1+"x 7", and criss-cross them over a bed of newspaper in my grill (smaller 3 in the lower layer)....
We have lost the sapwood or worse for rounds stored six months to one year or more uncovered for all wood specie. Top covered, we have suffered...
I cut 16"+ rounds as far as possible without hitting dirt and then drive a wedge in at the top with a sledge hammer to spread the cut and then...
Besides the usual: welding gloves, tongs, and metal cans for ashes (empty 5 gallon deck stain), I rake with 1" x 24" maple sticks. I have a full...
I replace firebricks routinely, 1-2 per year on average. I purchased these: [MEDIA] I do not worry about firebrick cracks as long as the bricks...
I hand file one link at a time in a vise for saw chains in bad shape. Half an hour produces a nearly new chain with a file in decent shape....
I try to maintain a cutting and splitting pace which is sustainable and so do some everyday. I use asper-cream (or the less expensive no-name...
Merry Christmas! With temperatures over 50 deg and the sun shining, the outdoors beckoned today after the family opened presents. My Makita's...
The Makita has several chip controlled shutdown conditions which my 120 volt chainsaw does not have. The 120 volt saw is a "widow...
After cutting two more 20" lengths off the red oak butt log today, the Makita hit another milestone, an 18" cut: [ATTACH] Cutting times are not...
In hindsight, it seems obvious to use a toothbrush with a "hoard" but the habit was to use the compressor. The toothbrush was a surprisingly good...
We "hoarded" used toothbrushes for years and finally found a good re-purpose for them, cleaning my chainsaw. I usually use the air compressor but...
The Makita chainsaws are an "odd" setup, they run two 18 volt batteries in series to create 36 volts which is why I use the word "pair". One...
My original thought was a "brute" of a chainsaw: The DeWalt 16" battery chainsaw re-barred with a 14" combined with the latest battery (at extra...
I will admit to "cheating", I put on a new saw chain before cutting this oak tree. Environmentally speaking, the fossil fuels saved by using...
We have many wind farms in Iowa so maybe I snagged some renewable wind electrons. :yes:
My biggest cut so far, red oak: [ATTACH] I used almost 10 charged battery pairs to cut the upper 50' of 18" DBH main stem red oak into 20"...
The wind downed this 18" DBH red oak in the fall in the "home woods" (rot in the stump) and I worked on it this past week. Over 50' of main stem...
I purchased these tongs from Amazon for moving wood and coals inside my furnace: [MEDIA] I like them because they are short and the handle loops...
We burn 4-5 full cords per year. We hit 7 cords when we had an extended period of sub-zero high temperatures. 25% of our wood comes from our own...