I feel your guys pain, I am running around with a moisture meter and hand splitting a lot of stuff trying to figure out where to go after all my...
I picked up one last year for 75.00, decent saw. I have a small army of ugly cheap saws that I either loan or let others use when out cutting...
Anyone have any luck installing the big bore kit in this saw? I have to split the bottom end on it and look a little closer at the bearings...
Eghh embarrassed to admit this but I changed the plug in it twice since I had rebuilt the saw. Second plug was in for many moons and was pretty...
Who ever bought that saw will be happy. I have an 021 that I did a top end rebuild on in 1995 and has been one of the limbing saws and odd job...
I also heard that this may cut down on the emerald ash borer problem? Hopefully so, as much as I like free wood, I am not a fan of invasive...
Well Todd, there might be a light at the end of the tunnel. High 20's forecast finally for the end of the week. It gets old when I woke up to...
There was a period of time where you could qualify for a tax credit on solid fuel upgrades.
FYI, if you wondering how I can get wood that low of moisture, after a year to two years stacked outside on pallets with the top covered in single...
I would like to chime in on the seasoned wood piece. Most wood stove manufactures and the EPA suggest that 20-25% moisture content is sufficient...
Good info Stuckinthemuck. The wood is those 4x4 oak skids about 5 feet long used for semi truck shipping. I calculated the pounds of wood...
Buddy of mine picked up a load of oak skids from a shipping company and said he would share some of it. I am going to cut one and probe it with...
No fun over here either, woke up to -18/-35 with a wind chill. I have half a skid loader bucket of ready to burn wood left. Rest of my stacks...
One side note, I think the cat stoves and hybrids are the only ones that will pass these tight regs.
Being informed, knowledge and education are key when overcoming these issues in my opinion. Power plants, propane delivery, fuel standards for...
I see that the forum was closed relating to the EPA proposal for new standards. I am linking the EPA document with whats under the hood to your...
That is what I was referring to without stirring the pot too much. Like I said, I am happy to hear that there are good things happening. A...
I have switched back and forth between the two 1st gen and ceramic. I think the ceramic held a higher temp later into the burn than the 1st gen...
They mill hardwood flooring, boards and they have a general lumber yard. The slab bundles are not cheap though, running about 100.00 a bundle,...
Around here is it is Ash, Elm and Oak in a 4x4x8 bundle, .5-2 foot wide and 1/2" to 4" thick.