The end of the burn cycle is usually when I get a backpuff as you described, either from the back pieces not being charred enough and sudden off...
How tall is your stack on that tl? When I had a harman, that combustor package was prone to ash plugging. The shoe brick and combustor holes...
Some got mixed in one of my stacks, I put a split of it on the bottom front, does magic for getting a quick light off of the cat. After last...
How far was the stove into the burn? I've found keeping a small amount of flame in the box is a big help, shutting the air down in increments...
Interesting post above about running two stoves, last night I loaded at 10:00 PM with a full load of Oak, engaged 5 minutes later, had air cut...
It's always enjoyable reading everyone's setup and techniques. I probably shouldn't have canceled the order when the progress came out, the...
Sounds like you are having success running the progress, I'd still like to see it in my situation able to cruise 500-600 degrees at times. I've...
Thanks for pointing to the post under the IS thread, must have missed that portion regarding the intermittent secondary/whuffing. I'm still on...
I don't know about backpuffing in the Progress, but this was the only type of behavior I could even compare to backpuffing that I saw with our...
Flamestead are you running both stoves or did you return the IS and just run the progress again?
That is the challenge when you have a draft old house, temps that go from 40 degrees to -30 coupled with nasty wind storms. You need serious...
Magnum Countryside P3500, 3 dollar corn this year was a no brainer.
That is what I have experienced with the fireview, settled into a nice cat burn and poof, very random and worked every angle trying to diagnose it...
Wish I could just hook it up to my stack for a one day trial, tomorrow or Wednesday would be perfect. 5 to -16 for a low with 30 mph winds....
I have to keep a steamer pot on top the stove so the cats don't jump on it like you do flame, had a bad incident last year! I generally need a...
It did look pretty big to me too, I wouldn't worry about it too much with a side loader and tall andirons though. I've been surprised over the...
I normally check single wall temps with an IR temp gun because the magnetic thermometers are way off typically.
Not really sure the fireview is 2.2 after the new combustor scoop came out? Anywhoo, they had an early version running in the test lab when I...
I agree on this, we cannot read minds when someone is talking about flue temps. The last two days on single wall external I have been running...
The franklin hybrid that I saw this summer seemed pretty interesting, didn't get any info on firebox size but it seemed a lot smaller than the IS.