I put one on my stack to prove to a stove company that the problem was not draft related with my setup. I've had a machine screw stuck in the...
Sherwood I did an experiment last night, I hooked the manometer to the stack read .20-.22" of water and then swung the damper shut and it read...
I've had this problem too, built a 18" deep 4 foot tall rack. Anything too long gets put on the rack and then I run down the 2x4 edge as a guide...
Got a laugh on this one, found 3 windows that had open storms.. oops. I must have had a dumb *ss attack this fall.
Nothing really new for Minnesota, friend just called from the lake he said we are gaining 2" of ice a day with these temps.
Sometimes you have to sacrafice a 1/4 load of wood to get that 3 to 4" coal bed. I used to rake a pile of coals near the shoe brick at the back...
I'm with ya there Sam, I just took a draft measurement on my stack, came in at .22" of water. If the stove room stays at 85 degrees the temp...
Is the smoke smell coming from or by the loading door on the progress by chance?
Interesting, two stoves with two stacks running the same wood. You will have to post some observations as this winter wears on. Sounds like you...
http://www.hechlers.com/store/index.php?main_page=product_info&products_id=692 Take a look at this link and you can see the holes in and ports in...
Well its hard to blame yourself for getting a good deal on something. Maybe it is something simple and it will work out well for you, if not...
I think the case in point is that those recommendations are to prevent condensation near the top of the stack. I sometimes notice icicles hanging...
Well honestly that is why these forums are so important to get real world opinions, reviews and advice. Woodstove shopping is similar to mattress...
I'm biting my tounge and staring at my fireview chanting its ok its ok its ok now
I had mine out on the oakwood successfully two times, maybe lucky or maybe it was put in slightly differently than the tl300.
I was blessed with a barely used woodstock fireview that needed rebuilding from the owner running it in bypass when I was suffering with the...
Trip to woodstock would solve all those problems! I'd say check the MC and verify the stack and cap are clean and give that shoe brick and...
Pete, I feel your pain. I feel bad for anyone who has a troubled Harman.
I almost took a picture of it when I was there but out of respect of secrecy I did not. They had a pretty sweet-tall-soapstone masonry heater...
How dry is your wood?> The handle that you bypass the combustor with when loading. Sounds like you have plenty of stack. If you have never...