Maybe a suggestion would be a owners only thread/Review of the IS or Blog. How about pulling off the best of this long thread and posting a...
I have found it hard to capture the awesomeness of the fireview. Sounds like the progress is treating you well. One take away I have had from...
I can get no smoke at lower temps but over all guaranteed performance at 800-1000 and usually that is the temp of the probe by the time I get the...
I have a probe thermometer and engage no earlier than 800 usually at 1000 degrees. Have the second generation SS converter coupled with the SS...
Thanks for the reply Fox. I have tried the method you speak of before, I am not too comfortable with the extra smoke generated on the front end...
So the fox fire method is to char the wood? Then immediately set the draft to 0-.3 and leave it? If you could, please give a short detailed...
Seems a bit low of a stove top temp for a full load? Did you check or smell outside to see if there was smoke out of the stack? With 16 feet...
Love those stacks. What's your preferred split size with the ash Dennis? Diameter and squares or triangles? I've been processing a huge...
It should have a semi firm engagement, I usually set mine with a dollar bill between the gasket trying to get the tension just right. It will...
Love that neat shed roof stack you have. It is depressing to watch the wood vanish. After what happened last winter, I doubled down on my...
I find up here hackberry is a pretty good wood, but if split larger takes a long time to season. Some of it in my stacks has taken nearly 3 years...
Maybe put a heli-coil and a stainless 1/4-20 bolt or some stainless strapping if the self tapper doesn't do it? Never a good feeling with a...
Came home to find the bypass handle loose to the point where it would almost fall down on its own. The jam nut on the ubolt worked its way...
What do you think was the cause of this, extremely hot coals sitting on the bottom plate of that andirons? If I remember right, those are 1/4"...
Yup, that is the beast that I saw. Maybe there is more to the story.....
Large stove room?
-7 with windgusts to 45-50 mph, blizzard watch for tomorrow afternoon/evening, not going to be pretty.
http://www.grainger.com/product/2T650?gclid=CIv3w-PrgsMCFaNj7Aods2gAtg&cm_mmc=PPC:GOOGLEPLAA-_-Test%20Instruments-_-Pressure%20and%20Vacuum%20Measu...
Way to go. Those t5's and t6's seem interesting to me, never had a chance to be around one or burn one. Looks like you had it stuffed NS?
I can pull the cat probe and install it there too.
