For the champion 2500 I am supposed to get 34 hours at 25% load on a 20lb cylinder according to the specs. I then acquired 8-20lb tanks! My big...
I run my propane generators from 20# BBQ tanks. No problem running the 4500 watt water heater during the outage, though the ambient temps were...
I have an NC30, it's an easy breather, 12 feet should be plenty. Do you think that due to your upside down stove pipe situation that you had...
This is correct for a regular float carb. There will be gas left in the bowl even when the engine dies from lack of fuel. Maybe the fuel level in...
I've had two stoves that get 100% of their combustion air through a single OAK stub on the back. Nice. My current Englander NC30 has a nice OAK...
Yes, I run my cat stove low and slow for maximum burn times and comfort. Plus our climate here is usually just not that cold. Anyway, running this...
To the manufacturers, and especially their marketing departments, 10-12 years is the same as 10-12 thousand hours. It's a trick because nobody...
You can never outexercise a bad diet. Or maybe put a better way, you can always outeat the most extreme exercise plan. Losing weight is 90% eating...
The roof overhang looks to be just metal onto plywood. That would flap in the wind.
We were talking about tuning the high jet at WOT out of the cut. Some saws don't start 4 stroking at WOT, they just stop accelerating and sit...
That technology, all in one heat pump water heaters exists and sucks for several reasons. I'm waiting for a split system so the heat is taken from...
Shouldn't have to braze and really very few run nitro. Most will just use the regular vacuum gauge/pump set and suck it down to -30 for an hour...
I think some saws don't do the four stroking thing as much as others when you are trying to tune the high jet. They just run smoothly faster and...
I own one for my home and use it sort of as needed, our climate is not extreme enough to leave it on all year. So when you turn it on to heat or...
Nice wood and price. So forgive my ignorance, I cut logs from out west that are all very large and straight. The branches are all too small to...
Yes, we love pics! and install stories too.
These days I just buck delivered logs with a long enough bar to not have to bend over much, say a 28". Not a climber, a limber, or needing to hike...
I followed the exact advice of this thread which was to empty and dry everything. Did you read the responses? I checked back and you contributed...
I use the sooteater and purposely flip the direction to drill forward on the way up and in reverse on the way down and I pump the head up and down...
That fat bottom girl song just started blaring in my head! I'm sure they can find love, but they could still use some pedal time. Another thing...
