Getting the backgears working in one of my vertical mills again. Now just have to put the other one back together. Variable drive blew out so...
I had a shop back in the 70's with a swamp cooler ( huge one fixed ) it poured water pumped from the river over the pipes to cool the air - it...
Very nice Shawn.
I like the gun shop idea- they can easily put it out of its misery.:rootintootin:
:heidi::p:picard:
Yech, people in ill fitting clothes with sharp instruments + those interrogation lights ..........
Liquid or explosive?
Don't feed the dogs + lock &load. This is getting long in the tooth. Went through silmilar back in the late 70's - bank robber- leos chased -...
Ah the beginnings of CAD, Way back- 12" electric(worn out) >14" poulan(worn out)>20" 116Si Dolmar( runs ok, good parts unit for someone/ no chain...
The ultimate in older equipment was the Simplicity PowerMax units ( also under Allis Chalmers, Montgomery Wards, There might have been a couple...
Too many dang safety functions on stuff now days- and less than adequate schematics to even trace things down. Most of the entry level lawn...
Assortment of saws/ bars so it depends on the size of the logs/ trees at any given time- most of them are Dolmar units
About $800 clams too much
Good one. Not up on the fine details but basic is fire going enough to create off gassing which is then collected allowed to cool some so...
Bunch still are- Finland, Norway, Germany to name three that I have seen post of in the last year or so. US printing office still has basic plans...
Your Craftsman is likely limited to a 1/2" wide blade at max. If it is a 3 wheeled version you are further limited to a maximum of .020 thick...
I have 3 piston compressors 7cfm,15cfm,50cfm. 7cfm on a 60gal tank - always waiting on it for on the air tools, 15cfm on an 80 gal tank is...
Weather stilll doing the yo-yo thing here also. High 80 ,then down to 40 on Thur, struggled to make 60+ on Fri, Sat got to the low 70's, Sun ?...
Tracking issues occur when one side or portion there of gets dull or the overall blade becomes dull. I have a griz 17" also. Only been doing...
Always room for more wood, as was said above where their's a will there is a way. Although I am a bit picky - must be Box Elder / Silver Maple or...
