mostly for Milwaukee metro members. Out of room, showed up couple days back , fresh cut, I can whittle it down to human size as there are...
if you are fat on the oil mix or not the right oil could be a bit of carbon build popping loose , Or because it is a new saw maybe some plating...
Frick mill - think you are going to be needing the tractor power for those , 100cc would be woefully under powered. a Good cabinet saw will...
The only thing with a big magnum case is that to take advantage of it requires a longer barrel than 20-22" . I don't know if Mfg's even off...
screen is spark arrestor for those chunks of glowing carbon. that muffler has a cat in it which is why it runs so hot. so the basic mod is to...
Well sales was/is partly correct- not the slide but on a double action pistol ( not a revolver) the trigger pull is long and very heavy, hence...
procrastination, :D me thinks
exactly-
That being new brick and all, it would be in your best interest to treat with a water proof sealant, Not Thompson though as that stuff doesn't...
Welding - blame mostly on automated systems- then qc- What ever is going on at Western/Fischer/Blizzard snowplows in the welding department...
likely the person - overloaded stove and expected to be able top snuff it out with the damper- I do not know of any current mfg stove that works...
For a deep unrestricted low end reproduction Tubes Rule, but for a clean high end solid state is better. Solid state will clip peaks in the low...
I had a 1980 ish moble home set up similar to you bedrooms off narrow hall. stove was rated at 1100sqft ( about 2 cu. ft.)- it was of secondary...
Yep, them slickers want the country feel- but none of the inconveniences, so by the time they are through all ya got left is another suburb .
Off loading 16ft from a 20 ft trailer. in Feb. 16 ft unit about 2500 lbs. Day before was very cold - fuel line froze up in truck just shy of...
Nice loads- been raining here off and on for 7 straight days. Anything off a hard surface is either a bog or if on a slope a super slide. Per...
Gran Torino ?
Geez, it's bad enough when the mag. contactor shuts on mine sounds like a 30-06 going off. Obviously not a soft start item.
Here ya go Scavanger- a little project in the works from a bit ago.
Same cap, no screen, no birds, I awalys do a short hot quick burn before I venture forth for annual brushing- takes care of any pointed end...
