Two stoves is certainly a far better way to heat. WE used to heat with just one Quad 1000, then added an Earthstove wp50 and it would run us out...
Install a speed controller in the feed to the draft fan and adjust it into the sweet spot. Buttttt, if you are going to sell it these thing are...
Thanks AIN'T DONE YET :D Getting the cabinet done is the easy part. Wiring the beast is tedious. Getting the wires to all lay right and bundle...
The practice the manufs have started of controlling the fan speeds with the feed rates is another CYA tactic. So many people will not bump the...
Every so often you will see a motor that's noisy and no manner of fooling withe it will make it Quiet. The open frame motors with the heavy...
If all that squaring and jigging does not help, NOTHING will. Looks great Don
More goodies came in the mail today including the GIANT AZZ RED START BUTTON. :D Set about doing the first complete DRESS REHEARSAL Here is a...
More goodies came today. Gotta get my butt in gear and do some more work. I got a start button thats a REAL START BUTTON. Red and rated at...
There are extreme duty gaskets made of high temp silicone for use with the exhaust fans They can be used many times and not tear up like the...
Hmmmmm Ok Swap the motor out for an open frame style. These tend to be a lot quieter. The issue is the control board and the speed control...
Dirty voltage As mentioned, it is a harmonic that is caused by the voltage cycles not being perfect. Many of the triacs used in these stoves are...
The yo yo thing is pretty much it. Our Whits do it, especially after a complete cleaning. It's more pronounced until the stove gets hot and a...
We have been going through a 55 gallon barrel of shells per week during Jan. We had several days the past week that we only ran the little stove,...
The best part is when the cat wanders off with something I need. This particular breed has very very long articulate toes and can grab stuff....
Went out today after breakfast and stopped by Fry's Electronics. Got a few terminals and some other tidbits. Went to work on the self contained...
Wet cold morning getting started, and the one little stove is not up to the task. Stoked up the big boy and trying to get it warm in here. 64 F...
Get that little pony trucks front end checked out well. The least it's going to need is a serious inspection, then a trip over the lign up rack...
More goodies showed up. I received the fixed resistors I ordered and I soldered one onto the pot terminals to keep the low speed of the draft fan...
Looks like a great upgrade. Good bet that customer complaints had something to do with this change .???? It's always good to see companies...
Gotta head out here pretty quick to babysit the grand kids for a bit. They don't have school today and the daughter has clients at the salon where...
