The problem with an A-Frame is that all the heat goes up to the top of the "A"....takes a while for that to work it's way down to the living...
Englander control panel has the same capability....exhaust fan can be turned on by itself.
X2
No ash pan on that stove, as far as I can see. Only cleaning that can be done is in the firebox, and inside those clean-out "ports" on the side...
Yup, all about the air intake. Start by cracking that damper open a little at a time. If it's at 1/4", go another 1/8" and see how that effects...
Maybe Lousyweather can comment on this..... Can Harman ignitors be tested out of the stove like regular cartridge heaters w/ 120v? Do they get...
Uh oh......:whistle:
Let me add my 2 cents to this. The sparks flying from pellet drops are normal, and it indicates airflow up & out of the pot, which is what is...
Eric VW I'd like to see a video of that burn flame....it looks very long and stringy, not usually what you want. Shorter, more lively flames...
So, 2 final questions......what did you do to get it to burn correctly, and do you have a good quality surge protector on it? The electronics on...
LW was talking specifically about owners who run the stove at feed rate 1 ("Originally, I mentioned the dangers of running the stove at a feed...
So you spent a LOT of $$$$ on stoves that are supposed to be the "Cadillac" of stoves, that will pretty much run themselves. And I'm also...
A private tour, no less. :rofl: :lol:
Manual says to adjust air damper according to fuel setting. On low fire, damper is supposed to be completely closed or not more than 1/4" open,...
