Yep. I’ve received boxes titled Big K’s Sausage Emporium. Lol. All they care is that the zip code and address are correct
I actually watched a guy start his saw with the sheath on and made half of an attempt to remove it with the saw running LOL. Thankfully he thought...
+1 on the Predator mentioned above. I have never actually owned one, but I do own several Hondas. Predator is pretty close to a perfect Honda...
I get what you’re saying, and I thought the same thing. I do enjoy the speed of the single speed pump of the tractor. And I like not having to...
I’m still gaining on them. Your number is coming up soon enough. I haven’t really bumped it back at all, it was just a long list
I would be careful unbolting and raising the building from that foundation with the dirt inside pushing out on the walls. With a good concrete...
Subtle hint...... I got it ;)
Grease that bearing every 20 tanks or so. Probably once or twice a year for most firewooders. Nice looking saw.
#LordOfTheStihls
Probably need a pto pump to get enough flow. Most remote tractor pumps are only 6-8 gpm. Mine is 12gpm but it works ok with a 3.5” cylinder. I...
Sawzall, chainsaw or hatchet can make whatever sized pieces he wants:yes:
Depends on what smoker he has. A side box might take 12-16 pieces where an electric or propane may only take small chunks or chips
When you pull the cylinder, I’d try and get a good look at the case bearings. Or pull the seals and get a really good look. Wiggle the flywheel...
As long as it will pour into your saw, it won’t matter how thick it is after a few minutes. The heat from the saw will warm the oil regardless of...
No not at all, but you can tell the wife whatever you deem necessary LOL The super jolly, which is the same as the Oregon 620 I believe, has a...
It took me a while to figure it out as well. Until I realized that because you are rotating the vise on an angle, moving the back of the vice away...
The vise needs to be centered. If your left cutters are shorter than your right cutters, loosen the jam nut on the backside of the vice and loosen...
Your vice needs adjusted for the gauge chain you’re using to get L and R cutters the same length. The Super Jolly needs it too
Are they set up the same as a 350 or 346 where they have the bar plate that pushes the oiler hose down in tight? That outer bar plate can get...
Yes
