Got all the overhangs built. Pulled away what I had for scaffolding and started the siding after adding some blocking where my angled eave soffits...
Yeah, ordered a 94, the first year of the factory turbo. Turned out to be another boat anchor, just a little bit better. Iirc that the 2nd half of...
Getting into the slower parts along with some other distractions. Not a lot to show but I'm trying to get to the point where I can confidently...
I let go of my first 7.3.... at 7600 hours. That was in '88. Went through 4 more of those but still have 99 f450 with only 72k miles. Not nearly...
Freightliner sure seems to have the municipal market wrapped up.
Should be a great trip. On your way north out of Missoula heading to Glacier, you'll go by Flathead lake. Look for the most unique "museum" ever,...
Pretty hard to carry a few boards, climb a ladder, pound in a handful of nails or cut a board to length with a phone in your hand.:rofl: :lol:
Today's the day! Came FedEx mid day. :ups:. [ATTACH] Very well packaged. [ATTACH] After a little "some assembly required" got applied and the...
Yes, I've never had any problems but most of my use is for non finished (sheds - barns) type use. I did use green rough sawn in a small 2 story...
I think it's the full dimension "sawmill" lumber with clean square corners that make it look good, but thanks. Anymore if I pick up a 1.5' x 3.5'...
I'll let the pictures talk. I was told that these were never used and I believe it. Nothing assembled, cords still bundled up and tied, no wheel...
As your skills build, your grunt is fading :eek:. At least in the construction trade. It's a good thing that I'm working on my own chit. I'm just...
I did the math, converted the cu/ft to gallons, then found the weight of #2 fuel and estimated the genny's weight. Figured that it's easier to...
Or I started it a good bit before I started this post:whistle: I have a post in "The sawyer room" as I finally bought a saw mill, and this is my...
The guy I bought the bigger generator from is a Cummins dealer and he said he could sell it in a minute to a maple producer for $5-6k with the...
Wifey got tired of waiting for me, she's quieted them right down with her can of "Pam" :D
Well you might remember my last generator project, I found a little kubota 6500w diesel. Several people and generator "site's" told me that 6.5kw...
Yeah, I wish my 12 burgers (above) were 12 steaks :thumbs:.
JB I did see a guy on YouTube that rigged up a wire brush on an old motor for putting the shine on bands before sharpening. I already sketched out...
My mill came with a sharpener and tooth setter, neither of them were ever used by the previous owner. Any secrets?
