Just looked again, the first saw is a 1991 second does not show the tag. I also noticed that neither saw has a decomp valve...............so, you...
A few months ago I used a new Chinese intake pipe on a 372, no matter what I did the thing would not seal against the carb! Threw it in the trash...
Not to my knowledge, rule of thumb is no less than 0.020. When you think about it 0.020 is .5mm approximately. That is pretty close! What will...
I've seen guys get away with 0.015 squish on smaller saws <50cc but on the larger saws anything under 0.020 is just asking for trouble! If you...
The first saw looks to be in a little better shape to me. A new HD top cover is crazy expensive, and the decals are NLA. My guess is both will go...
Here is the seller of the second saws web site. http://pacificsaws.com/
Is that the 'Harley Saw'?
So, if HittinSteel puts the 7900 he got from me up after a couple years of hard work you'll know what somebody is in for! LOL!
OH I followed along on the 505 build thread. However I thought this was a different saw because the color looked more Poulan green to me than the...
Even after you get the mains out it is a bitch getting the green goo out of the bearing cup!
Wow, your lucky that thing didn't squirrel around and flip the tow vehicle!
Definately rode hard and put away wet!
I got you covered, but the thing is UGLY! Faded, black marks, scratches and all no breaks or cracks. You can have it for the postage.
Yes sir, and you won't have to worry about spinning the bearing, however you must plan on selling the saw before it needs another set because they...
Good idea 4Us. +1 on factory gasket thickness and squish out of the factory can be anywhere from 0.030 to 0.050. Nate, removing a base gasket is a...
The ring(s) are very important, they hold the piston square in the cylinder. Measuring squish without the rings is an exercise in futility. The...
Fuzz, my wife's pearents are from the Ukraine. Her family name is Posiko, which means 'bee keepers' the whole village is bee keepers, the symbol...
Fuzz, for that kind of work, I use a Husqvarna 288. Old school but a killer saw.
Pardon me, but what on earth is a HoneyFuzz? I'll go first, I like beer, I especially like Killians Irish Red, My cat Leo is red, therefore...
Yeow, Kevin I like the color and what looks to be a Meteor piston! How much did you have to take off the pin boss? On a 372, I have to take off...
