I am interested in the old cylinder if you’d like to recoup some of your funds and if you aren’t using it anyway
+ one size fits all :picard:
Get an oem 390xp or 395 decomp for him. They have a larger bleed hole
Don’t know of anyone who has one. I don’t remember the extent of the damage, but I do know a couple tig guys that could fix it if the OP can’t. It...
Avalanche tree. 100%
Nice pics, Noooobie
I didn’t see anything in the service manual. But out of a dozen new ones that I’ve had here, the oil pump is siloconed to the case
All of them I’ve been into were packed full of grease inside the oil pump and then sealed on the outside. They don’t want the crankcase sucking...
Op looks like honey locust to me. The split also shows the lighter honey colored outer ring [ATTACH] [ATTACH]
You don’t see many burned up 3120’s because the carb has a fixed H jet and they’re set pretty rich. And limited ignition. Be careful cleaning up...
Guessing the grinder isn’t perfectly calibrated. Turning the dial up from .050 to .058 or .063 will move the center of the chain in and remove...
If he doesn’t want it I’ll take it
Sorry? :)
460 is probably a parts saw. You need to fix up a bunch of 039‘s to give to this guy. 460 and 461 both use a snap ring on the crankshaft so the...
Yeah I was getting diamond blades 25 years ago for about $150 apiece, and then I bought what I thought would be a good one for $500. It lasted...
If you cut the end of the fuel line off on a long angle, the pointed end is easy to feed through the holes. Then just cut it off square again...
I guess they’re more than that now. Jeez. Mine is a 680 and they used to be $1600
Yeah they’re not cheap. That combo is probably $2k now. They work well though, just slow. They need water hooked up to lube/wash the bar
Powerhead is made by Efco in Italy. Good quality. Can get chains on eBay for $150-200
They are now. I’d get Nachi 6202 c3 shielded bearings from eBay and pop the shields out. They have metal retainers
