Carbide chain. Fits any saw that matches the chain specs. Stays sharp longer but cuts slower. Doesn’t like rocks because it’ll chip. Needs...
Planning another gtg this year. Same as before, but I plan on having some of the wood across the road already c/s/s in the shed. Probably kick...
That’s a woodcock
The 10° slide in vs out….picture filing a left hand cutter. Some guys drop the file handle about 5-10° and file up through the cutter. Moving the...
Just hiding the messy table. It gets cleaned up, then it gets scattered again. Can’t win
[ATTACH] [ATTACH] The white piece…..it just snaps in place. These 2 white tabs click into the case. And the front is held in place by the bar...
I don’t have them as extras. I have a new MS 400 awaiting port work in the garage and they use the same parts I believe
Didn’t mean to drop the ball on checking this out for you. Had a busy couple days trying to run down fixes and parts
I can’t remember the name of the other threads, but there are a couple where I explained what I had to do to calibrate mine. Note: make sure you...
There are differences between models, but the upper piece of plastic that surrounds the top half of the clutch I figured held the lower piece in....
One or both pieces of plastic are broken. The big piece holds the smaller one in. Chain catchers work until they don’t. Yours looks like has a...
I believe there’s something going on in the trigger. Or the white plastic carb pulley is worn or cracked
That hack works better on a 394. They have a block instead of a boot and use longer bolts, so the carb will rotate further. Your fix is a popular...
I’d get an MS261 or 550xp. The fuel efficiency comes from motor design changes, not so much the mtronic. Most new saws use stratified...
The 572 kit is, or at least was, $30 plus tax at the dealer. The clutch cover works, the dogs I believe need slotted and maybe ground on a little...
460 mufflers have an internal screen with tabs that fold over it to hold it in. The dual port cover has a screw as in the top picture. Not that...
I believe that’s a hiway muffler on the 460. OEM has the screen on the inside and doesn’t require a screw. I’m not certain what pitch the threads...
36 on the 390
23.5#
Ready to sell me that old junk oem cylinder yet? You’ll learn soon enough. Most Asian stuff isn’t worth the ibuprofen that it took to get rid of...
