I am toying with the idea of offering three choices for top handle: 1) OEM Half Wrap around $45 2) OEM Full Wrap around $115 and to keep the total...
It is a new starter, which do not come with any badging, I had several of the 375XP stickers in stock so used one. Saw passed the vac/pressure...
If you can figure out bees and porting you ought to be able to get used to it! We even put up a porting thread for you!
Chit happens, I started out as sort of a hobby business years ago, now busy Tue throug Sat!
Well given that you also keep bees, Fuzz will go nuts! Dexter, perhaps we will be needing an 'Official Bee Keepers thread'!
I don't think you being around is any sort of problem. Perhaps we will all learn something or get good recipies for pie or red clover honey from...
I have several spools but would need to know what size!
I think the admins fixed e-Mail alerts just a bit ago. See if you get another e-mail with this post.
Lets all wait until Mastermind gets finished playing with the two 665s I sent him, before sending 665s off to be ported. Give the poor guy some...
Agreed. Probably also explains why the BBKs on 7900s don't seem to work as well as the stock top end. CCV on the Dolmars is small to begin with.
There are two builder/racers on the west coast that two of the 665s went to, Adam Clarke and Adam Artzer. Spoke to Adam Clarke this AM, as soon as...
The 74.6cc 372XPWs came out right around the time HVA switched production of the cut-off saws to Partner who wanted to redesign them. It is...
There may be some differences in sound that come from a combination of 47mm bore, 38mm stroke combined with the quad closed port cylinder. The...
My preference would be a 665 with the 681 C/P since the 665 already has the stroked crank, so less work to convert. Failing that you could use a...
I was trying to get some 681 C/P kits out of Germany but they were stupid expensive and were estimated to be delivered in 5 months!
Hang in there Cory, I'll have one around for you!
I am just passing something along from a very good friend who is a long time pro-cutter. The performance loss between the 440 and 441 drove him...
I am really beginning to like those 'Partner Yellow' Poulans.
You are lucky to have the place your FIL built, stay there and enjoy the family. Saws can wait, they are just a tool after all.
Got a little further along. Still waiting on HVA for some small parts but here is where we are.
