Looks like a Mystree. buZZsaw BRAD, what say you?
Echo quality has been top notch on any that I’ve been into. They don’t always have the frills and ergo comforts of husky or stihl. But they’re...
You could drill another hole here on each side of both arms. Mine already has 3 sets of holes there [ATTACH]
2 actually. Only the crotches/gnarly/big stuff gets cookied. Easy straight stuff gets split
25 is the upper limit. But the 461R oiler will swap in. Or you can buy a couple parts from the 461R oiler and swap them in yourself
I have one. It’s not spectacular at anything. But it spits everything I throw at it. Seems built well enough
Looks like Fran from Dodgeball
:rofl: :lol:
Doesn’t count if you don’t whore out your wife and/or daughter. It probably draws the views, but dam.
For what it’s worth, I don’t believe there is an issue with promoting your own YouTube channel unless that’s the only reason you’re here....
If you look straight down at a chain, you can see that the cutters are pointed out a little bit. As the chain wears down, the kerf is narrower
Clipping the heels works really well for bore cutting also. Very smooth
Thank you for the mineral spirits. But let it be known that 10 gallons of me ain’t very much
9” x 9” x 16” long is .75 cu ft. Looks a little short
Never seen a plastic setup break or leak if they were installed correctly. The ones with problems are usually hacked together with parts that...
Affixing it would be better, but the bolts go through it and hold it in place. It needs to be there as a spacer
Shop vac during the day with 20’ of conduit added. Still didn’t work
That depends on the age. Newer ones run close to two turns out. Early ones about one turn out
I watched the Robertson boys from duck dynasty do this during the daytime and it didn’t work out so well. Make sure it’s at night lol
Possibly. I guess the only Home Depot rental saws I’ve been into were already owned by someone else first and maybe they had already defeated them
