You misspelled ported 346
Nice old saw in good shape. Looks like probably a 16” bar. Probably.325, probably .063 ga, can’t remember if they were 66, 67, or 68dl
+ naps
Could be white ash
Definitely open. For about a year now
1800
Harder to tell on some Stihls as the oem markings are lower on the transfers, behind the case and recoil. Mahle Gilardoni Kolbenshmidt (K$...
One of my favorites. I bet I cook 30 pork butts per year. :yes:
Since there’s nothing aftermarket available, and I’m sure an OEM cylinder is more than what the saw is likely worth, if you want to send that...
No. And I don’t believe there are any aftermarket cylinders for the 271/291 chassis
Best of luck
Line up the bar stud holes trying to put it in place, and push the top right corner of the clutch cover in while you pull back on the brake...
Your wheel is better for checking durations than port openings from top dead center. In order to use your wheel to find duration, zero the wheel...
It’s definitely not great having them that low. When you make a port taller you lose velocity, and having more of it open below the top of the...
You have your wheel at 0 with the piston seemingly at tdc. I figured you were going by when the port opened from tdc rather than duration. Either...
If you don’t have tools to raise the upper transfers, I wouldn’t raise the exhaust. You could widen the exhaust to 65% of the bore and match the...
I’ve added 911 to the tank and filled the fuel filter with it. Usually gets them going quick. Not certain if the new emissions type stuff will...
C83 is actually Husky’s own chain. Oregon isn’t making the chain for them any longer. Very good stuff indeed
Chain is one of those things where you get what you pay for. Stihl chain might be expensive but the cutters are usually a tick longer and they...
Pam is good. Pam is great
