Yes pin oak has similar leaves as red oak water oak is a member of the red oak family we do not have any water oak around my area that I know of...
There are people who will buy anything with the right advertising :D all the better for the firewood marketer
I have a Home heater made in bennington VT it is a wood eliminator but it does throw off the heat it is in my basement the 6inch liner goes ip...
Yes you call that water oak it really looks like Pin Oak from your picture if its like pin oak the only problem with it is it has a lot of small...
Yes that is why it is expensive its hard to find good locust logs they always seem to be crooked and the outside is very uneven you get a lot of...
the newer huskys have a switch it is built into the same lever there is a contact when you push that lever down you lift the lever for choke
I do not know what saw you have but it could be as simple as a switch or the wire to the coil an or ground is broken on the stihls the switch...
Sounds interesting your idea but it might be a more interesting to fix your winch setup to one spot and use it like a yarder somehow set your...
Winston rough cut locust is 2.25 a bd ft for # 2 lumber that is green #1 is 3.30 finished locust kiln dried and planed would be twice that I...
Nice I get mine from the traffic line painting company in my area 10.00 each I have about 40 of them for wood they save a lot of handling :thumbs:
X2 that is what it looks like could be the woodpecker was tired of looking for a piece of ash:D
As I stand in front of my sawmill in slop mud on january 25 I would say yes the weather is goofy anymore and its raining again in the rain forest...
Good luck it seems to be a common problem with them popping that o ring JB
Jon E just to let you know most of the sawing I do on my mill is black locust I buy it for .55 a bd ft and the retail is 2.60-3.30 a bdft so if...
Should not let the grinder bother you to much I worked landclearing for many years had a 27 inch chipper and we chipped up to 10 -12 tractor...
Yes they are solid rare for that big and the best part was i got paid to cut them and I did not have to pay for them used the township backhoe to...
looks like the same leak my customer had on her zero turn the kit for the charge fixed it hers was a ex mark quest
usually I do not get these big ones that are solid all the way through like these but I have to quarter this big one to get on the mill so I will...
[ATTACH] Had to cut this down at work was dead at the top it was next to a picnic pavilion the only saw available was a 036 with a 24"bar it took...
The customer brought me the logs off his property he wanted 1" boards to make a table it sawed real easy on the mill I used a 10 degree blade and...
