[IMG] Snugged the coil up pulling it away from the flywheel as much as possible. Put a .010 bus. card between the flywheel and coil, make sure...
Okay, Sorry for the delay on getting back on this but the new coil came and I finally had some time today to install it. Here we go. [img] From...
I hear that. People ask me what kind of wood I'm burning and I reply, "Must be ash trees, cause every time I throw some in, all that is left is...
Looks like it has some walnutesk signs too.
[img] 12 inches of solid on a 4 cluster. They probably average 4 -6 on most of them. [img] Here's our old IH backhoe. Not much to look at but...
[img] Can't get much more in here now. [img] [img] Measures out at just under 18 cord by my estimate. [img] After rooting out one of the...
[img] Normally back up to the big door and unload but it is full as I normally fill it. Door won't clear to shut so I'll go in the walk in door...
This year I decided it was time to clean up the small woods behind my house so I could get all the dead ash out that EAB has knocked out. Let it...
I went to 150 Halloween parties last night as the invisible man. :D
:drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool::drool:...
Get a bigger box. [img] Sorry, couldn't resist. One of the handiest tools I have is this little guy. [img] This was made by MAC but probably...
Stihl is good for doing that with everything. I bought a MS660 a few years ago and the factory air filter that it came with did a shockingly BAD...
I've posted this one before but that was just the top of the tree 25 ft up it y'd. One side was right at a 4 ft branch and the other was just over...
I thought of that as we after seeing it sizzle. I then went to another barn and took wood that was on the OUTSIDE cross stack end and threw it...
We probably run 80% easy - 20 % wavy. [img] This was an easier one as notice the round on the left is split down the middle. That is a 3 ft bar...
I'll throw this into the ring on my experiences. I do not have a moisture meter so it is a visual thing. We have a rather large backlog of wood....
Was wondering if any of you have ever run into this? We have a woods that has quite a bit of mature beech trees, lots of 3 footers. What has...
Asked on another forum: "So if you simply get rid of the points and condenser, and put this different coil in, the saw will work properly? No...
The thing I've noticed over the years that it is not the bending over to pick something up that gets me, it's the bending over and staying that...
[img] [img] [img] Wood sits on the beam at 39 inches, Top of hydraulic lever is 54 inches. Very easy to reach from either side. [img] With...
