I think your piston is in backwards. The arrow is supposed to point to the exhuast. Sent from my SPH-L710 using Tapatalk
[IMG]
Redbull661 on the OPE forum had a pic of a saw that he had ran Schaffer oil and how it cleaned it up. I'm thinking the Lucas oil should clean the...
The Lucas oil can bought about anywhere too.
I agree with what the others have said $450ish on the saw and $1,200-1,300 on the splitter. You can always start out high on your price and come...
I like the Lucas semi synthetic. It is cheap and the saws perform well with it.
Thanks, for updating. At $89 for the cylinder you will have a cheap good running saw. I think if you hang around this forum much you will regret...
I don't think it is poplar. The bark does not look right. Sent from my SPH-L710 using Tapatalk
That is how stihl does them. Sent from my SPH-L710 using Tapatalk
basod I made a video showing how far the ram goes out. [MEDIA]
Why does everyone use the cylinder with the compression release hole then most of the time it gets plugged?
This is the cyl I got. Bailey's does still have it. Husqvarna 544 14 29-07 Oem Piston & Cylinder Assembly (44Mm) For 346 Xp Chainsaws 544142907...
Do you have a little pry bar like this you could get under it? Pry Bar, Pinch Bar, Line Up Punch 15" ( HARROLD, OR USGI EQ USA) | eBay
The link works for me?
Also when you put the cylinder on be sure you have the intake boot on the cylinder. You can't get it on later.
Your right he is going to need seals. These are probably the easier saw to work on. You could pull the flywheel, muffler (2 bolts, or 4 with the...
Try the link again. It works for me.
Let him hold the flywheel:rofl: :lol:
You will have to grind a grove for the impulse. You could also file it but that would take longer. See that notch in the left of the riser, and...
I think you could just hold a little pressure against it, it may come while tapping.
