More pictures. The bulk of the components are installed in the enclosure now. A few wires left to run and we are real close to TESTING TIME. I...
Get well soon BIRD DOG
Doing some component testing this morning. I am running one of the Phase angle controllers on a room air fan sitting here in the floor. Things...
Thank you so much.. I can't really use a Whit positive pres. switch. These are N/C and open when pressure is applied, Whit used these to shut...
ed Not really "more cool" but easier to fix on site in the dark cold night. The cheapest I have found a replacement board for my stove is $300...
UHHHHH. Well those are way cool, but I wanted to be able to swap out parts in the deep dark winter night if need be with simple tools and without...
Got more work done today on the new controller Went to work building the Heat selector resistor assembly. Used a 3" square piece of aluminum to...
Copy... Sounds like fun...
That might be... The triac speed controls do need a resistive load to work right.
Go with low watt LED lamps and wrap them with aluminum foil to cover most of the bulb...leave a little hole in the foil so you can see if the lamp...
I have purchase parts from Mouser before. What are the boards you have on the bench ????
Thank you... Hardly simple, but easy to fix in anything quits. The micro electronics on a printed circuit board is certainly very compact and...
The cold has abated some and it's raining now Weather dudes are wishy washy on the forecast, with some saying low 40's F and others still talking...
Seattle got their butt handed to them yesterday... We are 25 miles south of Portland and got about 3 inches last night. We had both stoves going...
We are finally seeing Winter weather. Started snowing last night around dusk and snowed off and on all night. Not a huge amount...maybe 2-3...
We have seen Lignetics from time to time at the big box stores. They seem fine. Best pellets we have ever used were "Heartland" pine pellets....
Depending on what the gasket looks like it should be an easy fix If it is just the flat rope/braided gasket, that's an easy score at most stove...
Sounds like you are on the right track with the latest unit..
I have one stove with the pipe that has the high temp silicone O RINGS and it leaked a bit too. SILVER TAPE ...:yes: A stove with a tall chimney...
WW Sorry to hear about the crud. The stove ash/dust is a real pain when you have a respiratory issue for sure. Get well soon
