Well now... Been running the new controller for 3 days straight in every configuration I can think of. Just need to swap in the new mechanical...
It's snowing here. Not a huge dumping, but enough to make things all white. Maybe 4 inches now. As I dump another bucket of shells in the stove...
I ran through the specs on the auger timer that Napoleon uses (TRS series) and its rated at 120 volts @1 amp I used the HTRS series and chose...
Actually this controller will allow the stove to function just as Whitfield shipped it to the dealer. My heat controller allows a bit more choice...
Back in the early days when we bought our first pellet stove the local stove shop was the only tune in town....and parts were only available...
Unit fired up and being tested. A couple minor glitches, but mostly a stellar result. Will be replacing one SOLID STATE RELAY as these type of...
Decided to go all out. Yanked out the LED LAMP and inserted an MK feed motor with some tape on the shaft to see if it's moving. :yes: Restarted...
Just finished ordering some different 1/2 watt resistors to fine tune the controller. I got a package of 511K ohm...412K ohm and 300K ohm...
OMG The cost would be off in the ozones. For a one off deal its sweet, plus a great project. Having the ability to fix it quick if need be is my...
Thanks. I just wanted to be able to visually see the auger timing, and a lamp is easy and very simple. Getting the timing right in the groove is...
Spent some time going over the schematic on the new controller. Had some issues with things working a tad bit goofy. A few serious minutes...
The remaining parts for the new control showed up in the mail today and I quickly installed them ( See the two lockable pots between the meters)...
We have had some Astros...currently have a 97 RWD .. Not great in the slick stuff, but a great little rig for an extra set of wheels when needed....
Welcome aboard King. I have been doing pellet stove things since 1991 and the OEM literally hoses the end user. I have searched through the...
DAWNED COLD AND CLEAR 25 F this morning. Forgot to drain the water feed pipe in the barn last night, ....but there was little ice on any water...
Yess...the crawlers like to use the 205 as a doubler box.. A chain is an easy do on the 203 Just be sure the sprockets are not excessively worn....
DA FANCY STOVE CONTROL IS DONE (ALMOST) Finished the wiring a bit ago. Going to swap out the 1 meg ohm pots and install 30 K ohm instead. The 1...
DA BEOTCH BE DONE.. Finished the wiring this afternoon.....going to swap out the 1 Meg ohm pots on the fan speed controls and use 30 K ohm pots...
Did some good testing on the new panels fan speed controls (Have extra units) The recommended potentiometer will ramp the voltage from near line...
Hey Yank out the 203 and stuff in a 205 The 203 was a great case, but the 205 is a full gear to gear box and nearly bullet proof. Sucks when the...
