Pretty pathetic human being that would do that in my opinion, I don't care what age they were, what drugs they were on or who they were trying to...
I've always said there is a VERY fine line from being lazy to working smarter!
We Have a 3 point homemade that Dad picked up for the big ones. It runs off tractors hydraulics and is plenty slow but gets the job done. It just...
Syncrowave 250 and a 250x Mig. Go Blue! Took about 3 months of spare time to get it done but I work loads of overtime so that is pretty quick for...
[img] The winch might be the weak link on mine but I couldn't find a Good brand name with a cordless remote so I ended up with a HF one. I bought...
Yeah, I spent years using other splitters deciding what I wanted and how to do it. Knew I wanted a high working surface as I'm tall and didn't...
I built my own and the reason being no one was making one with what I wanted. Everyone's operation is a little different so one splitter does not...
As some said. Take all the drawers out. Most have clips that you pop out. That will get rid of about 1/2 the weight and you can walk the drawers...
Thank you for the info kind sir, learn new stuff all the time and I appreciate you taking the time to share. [img] The time line fits to a tee.
This stamped aluminum plate on the bottom side of the saw under the trigger plastic? Looked up the bill on mine and it's been longer than I...
Posted this before but this is my Dad's set up for in house stove in the basement. Holds over 1/2 cord and filled with a 1/2 truck load. Dirt and...
I think you will be more than happy once you get it running as it should be. I have had mine about 3 years now and love it. Bought it new with a...
I think I could outrun a snake. Bears? not so sure! :sherlock: Been to Alaska and it's beauty can not be described. You have to see it in person...
2 summers ago I put my boots on and walked out of the house. Felt like I had a steel splinter going into my toe. I leaned over and started to...
Grandpa started the dealership because they gave a discount on saws and he wanted one. He never was a big dealer but he was the first in our area...
Also watch the air filter. The first series air filters on the MS660 Magnums lets WAY more dust through than i wanted. Was REALLY shocked after...
Starting on that 009 parts saw now. Probably take a risk and get an electronic coil but I can always keep it as a spare if the other if it...
[img] Filter and cover on. [img] Another view of the fix with all the plastic on. Looks better and most don't notice it. [img] Switch always...
[img] I use a small triangle file and a diamond file. [img] I spin the ring compressor to where I can see the pin where the ring halves meet....
[img] I like holding saws like this to work on. Couple of thin pieces of paint stirrer on each side of bar and wasers to shim out so nut can be...
