It is raining here today I will try to get a picture of the log pile today Kinda a before and after JB
I actually have a pile of elm to mill for a customer , smaller logs 10-14 inch he wants them milled live edge for shelving I will get a couple of...
I am not a electrician but I do all my panels etc myself (my neighbor is a electrician so I get free advice) best is not to reuse your panel by...
I am thinking of upgrading to a lt50 if he is interested in my lt35 diesel let me know JB
I am not sure if you could section blades or not I would think it is possible as long as you could get them lined up correctly but I would wonder...
What is his price range ?? Sawmill exchange usually has some good listings JB
All my locust is by board foot , price is grade depending posts are @ 2.00 bdft #1 select decking is 3.55 bdft it varies on log cost also,...
Nice machine the custom sideboards are nice also JB
Chainsaw milling is tough to start with a 60 cc saw is not the best for milling if you could send a picture of your set up it would help with why...
If you really want to keep on the cheaper side you can put the big bore kit on your 6400 keep your mix fat at 25:1 for milling , the oiler is...
Yes all black locust it is mainly what I saw here at mill JB
All good here understand being too busy I am still fighting the after effects of that damm covid virus I had in december mostly really bad joint...
:popcorn:
I am sure it is a big difference sawing with a carbide circle mill I know how fast my edger cuts with its carbide blades a lot of my cutting was...
Yes still some snow piles melting now turning to mud piles :picard:edger is great one of my better tools (toys) it saves a lot of time and gives...
They were decent saws when Pioneer was bought out they were called pioneer/partner then it was just partner made in sweden they were eventually...
I usually run washer fluid and pine sol mix this seems to work real well for me but I cut mostly hardwoods it was also recommended to use cotton...
I am not sure how adjusters work on that mill anything look like it was bent or repaired anytime in the mills life? if you are running out of...
alignment setting makes a lot of difference in how well the mill saws you get it right and it stays real good unless you have a whoops and drop a...
I had a order for 60 4x4x10' posts almost got finished today had some good logs only 1 had a dry rot spot in middle last log for the job is on the...
