So do you now have John Deere yellow pellets?
LBT and pot cleaning and change of exhaust motor with the big impeller. Lacrete's in the hopper. Pics of burn pot deterioration :eek:
That's turn of events on their part :eek: I wonder what the reasoning is behind this :whistle: A part # would be nice but the actual motor and...
X2 Don't know how I missed this thread:picard: Dex still has a Fahrenheit as far as I know, check his avatar:smoke:
Can you scrape off the weird burn mark, if so it might be creosote building up in that area. My Accentra does that too, sometime you can see a...
Go back to stock(Fasco), not forking money out for a short live motor:zip: I see everyone is gaining on temps:thumbs: heading in the right...
I've been lubricating my auger brass bushing about 5 times this season and noticed a pile of fines seeping through. It's not spinning so that is...
Not a pretty sight, stay safe :D Just a heads up, another January thaw heading your way :yes:
Think of the feed rate as a limiter, the 1" is for no carryover the pot and no hot embers dumped wasted into the ash pan. Recommended feed rate of...
Daniel, You're in a different scenario than others which forces you into a survival mode. Having a uninsulated mansion has a massive appetite for...
It just shows the amount of shady workmanship out there, beware:picard:
That's a cheapo rail system:thumbs: Not knocking the work only agreeing on the expenditure:yes: If someone would feel unsafe, you could use 2x6's...
Thanks, good info to know:handshake:
Did you have trouble replacing the wingnut? I'm asking because my FS Accentra was a PIA to replace so I gizmoed a slightly larger nut and tacked...
Thanks for the heads up on bearing replacement. I wonder if the LBT is hard on the bearings:whistle: Or having a longer shaft sticking out past...
Day started in the -26*C and some java. Went downstairs and vacuumed 4 bags of Elite. Started a load of laundry and went for a shower, about to...
My weather finally made it down south, enjoy:D
1106'
This morning I've seen at 6am temp of -9*C drop to -13*C at 7am. It was 9*C with rain when I went to bed and this morning it was ice pellets...
I pass the brush in the flue from outside and then I do the LBT. but that's me. You got to post a video, part of the rules:D
