I rolled it up tight with some cement and stuck it up from underneath the stove. Here is a pic from the floor of the ash clean out on the bottom...
Yes it has a plug in the bottom of the firebox. I scoop ashes out directly so that is a possibility. I rolled up and cemented a piece of the old...
I have only checked around the door and glass. I have not checked the entire stove.
Can it still leak even if the outlet is packed full of fine ash?
Very cool!
You aren't kidding. :hair: That's why I've been easing it back in to bigger loads.
Yes it is the baywood door. I replaced the outside glass gaskets while I had the door gasket off. I will replace the center glass gasket when it...
I ordered the gasket directly from SBI that is supposed to be the proper one for the stove. I may still end up cutting the door handle off and...
Thanks saskwoodburner! I guess I just have to be patient in learning this thing.
Does this mean it will burn hotter? My train of thought was a weaker draft allows the heat to "sit" inside the stove longer thus making the STT...
After installing the 3/4" gasket I seem to have better control. It still fails the dollar bill test on the hinge side of the door though. I...
Good morning to you sir! What's it like in the south these days? Its starting to feel like winter up here in PA. X2 what TurboDiesel said.
Yep I still have it. Now that I look at it I see it says cement. Here is a pic... [ATTACH]
The stuff I got said it is rated to 2000*. I didn't look to see if it said cement or silicone on the tube but it came out like silicone.
Correct me if I'm wrong BrianK but I thought it was the amps that were dangerous...
I just kept the old gasket on it for now. Hopefully it will be okay until I can get another one.
I got it in. The door seemed a lot tighter. I guess I will find out once it cures. One problem I ran in to....the glass gasket kit did not cover...
After some inspection it doesnt seem as though the current gasket has any silicone under it. Surely I would think it has been replaced in the past...
I seem to be having issues with my stove door gasket. I have a replacement on the way which was ordered from SBI (stove is an Osburn 2200). I...
Not off the top of my head. I think I know where Lowe's is though
