I tried lopro on my 441 [MEDIA]
The MS290 with $23 MS390 topend that runs like a scalded dog. It has a new 18'' 3/8 b/c on it. [IMG]
Another thing to check is the brakes. Be sure both work. Leaking axle seals are somewhat common, then oil gets on the brakes. I had an 8N and I...
Here is the over running clutch. Over Riding Clutch I basically works like a ratchet. With out it if you push down on the clutch and have...
Mine too. I think he goofed up on telling her to get a 170 though. He should have told her she "needed" a MS880.:rofl: :lol:
I think $2500 is on the upper end of what that tractor is worth. The blade is too big for it, it looks like a 7'. It is also a light duty blade...
I'm not sure what the benefit is. It looks like it makes the cutting process slow. Sent from my SPH-L710 using Tapatalk
[MEDIA]
I've had the itch for a 661. I'm holding out to see what the 462 is. I also heard there was a 661 that was fuel injected being tested. I'd hate to...
I agree with what Kyle said.
Buy a harbor freight trailer and put some standards on it. Sent from my SPH-L710 using Tapatalk
That is what I heard on another forum IDK if it is true. Sent from my SPH-L710 using Tapatalk
Lol, that is hilarious. You had some guys wound up about it on the OPE forum. The 462 was in the Stihl calendar this year. Sent from my SPH-L710...
That pic was photoshopped. Look at the 4. Sent from my SPH-L710 using Tapatalk
I saw that too. I wonder if it is the MS462?
I heard they were outlawed but I saw Titan recently started selling them for a 3 point hitch. They are pretty dangerous since there is not a...
Like this? Muck Truck | Gas Motorized Wheelbarrows | Electric Battery Powered Wheelbarrows - landscapers, contractors, farmers, tool rental...
Short cutters on one side won't make it cut crooked. The chain won't perform like one with even cutters IMO. Sent from my SPH-L710 using Tapatalk
I put a log in my grapple the wrong way to push a wood pile over. [MEDIA]
I agree, one cutter takes a big bite and the next is not doing much. The depth gauges can not be set properly if all the cutters are not the same...
