Was just warned by a friend on Chainsaw Repair to 'better wear your ear muffs'! Nothing in the way of a muffler at all and no obvious provision...
You could also try WalMart, Poulan full synthetic in the green or black (labeled : Poulan Pro) bottle. Would not run it forever but it does a...
Stick with Bel Ray H1R! In gallons it is 1/3 cheaper than the quart bottles.
Randy, this is motorcycle stuff but I'd like an opinion about a port shape, the logic of which has escaped me for quite some time. It has to do...
We should get Randy to chime in on the porting question. Since saw porting is a completely different set of challenges than bike porting. Question...
Here is what I go by: 100 psi to run at all >130 to run good 150-180 to run really good. The above is for a work saw, racers sometimes are in the...
me too!
I have one of these, new never mounted. Cost me $400, I'll let it go for $300! This is one of TL's first kits done on a Meteor jug and includes a...
Well, I think I bought it. Thanks to Dex who said he would go get it! So we will see how this ends up! Also, a big whoop to Jon1270 for...
Well we could discuss this forever, suffice it to say the problem with the 570/575s was a combination of too long a shaft on the clutch side of...
That is it, Pics this evening busy now with customer saws.
MM perhaps you are right on the crank failures however the 570/575 had IB clutches and they had a problem with broken clutch side cranks.
I have a Pioneer 1073 Easy Arc saw with b/c. Has compression but needs muffler. Would make someone a good parts saw, 50cc 9 pounds. $25 plus ship.
What have you got in mind for the Solo 665s?
Ah, I just gassed up mine and it is running, got to do the AT 'new saw' stuff after it gets hot.
I agree, we can only find out what they want us to know! Guess everyone should just keep running and report IF they experience the problem. I...
OK, just got e-mail from my friend Bob, here is what he said:
look at your serial number if lower than 2013 week 39 you may be in trouble, I know yours was just rebuilt but don't know if MM replaced your C/P,...
Thank you Dex but the guy isn't answering e-mail so I think it is a bust!
Go read this: http://chainsawrepair.createaforum.com/husqvarna/562-xp-auto-tune/ I am in the process of getting all of what you will read...
