TL really had a good idea with these, a very cost effective way to get a ported saw without the wait and only a portion of the expense. Also, a...
I drain fuel, start and let it run the gas out of the carb. Put a little squirt of mix oil down the plug hole, pull it through. I store saws for...
Homies are nice saws. As for the dream, perhaps too much HOT food before bedtime!
Well, Dex, so do I but that seems not to be. I suppose one day I will come across a use for it. Perhaps on a total rebuild for someone.
Seems not to be any interest in this, so back on the shelf it goes. Won't be buying any more of these.
That part should be replaced often, otherwise you will cook the saw because of air leaks. Do what you want/think is best, I am just warning you!
It is a manual 'in the field' sharpening system. http://www.timberlinesharpener.com/
You did not look far enough, it is for the 142!
Now, now boys lets' not let this turn into the BS that is AS! Everyone has something to add!
Gunk makes some stuff called Engine Brite SHINE. I spray it on the clutch side of the case, the front of the case and on th inside of the clutch...
Try teflon tape ,yellow for natural gas, around the threads.
The standard vs the HD filter swap is not a big deal, just the filter horn, filter and filter cover would need to be changed, cost would be a...
Since the starting bid was based on the parts voted on by the membership, specifying a different set of options would impact the pricing of the...
I would agree with the loctite, if the threads in the jug are the least bit worn, you may find that the next time you pull the muffler if using...
Mike Acres site has all the info. It came with either 7/16 or .404 standard with 3/8 as an option.
No problem Dexter, ship it when you can, family comes first. If you have a chain pitch guage, see if you can figure out if it is 7/16 or .404 chain.
I used a HLS boot on a 372XP rebuild, looked good but would not seal against the carb blew BIG bubbles in the P/V test. Put on a new collar still...
Well he had cut a few cookies before making the vid, so he already knew it was a 6500 RPM pig of a saw!
That is what is cool about the old saws, gives you an idea of how good we have it these days. That saw is older than the average age of most...
You are welcome Dexter, it was my pleasure, and thank you for expending the effort and time to go get it. The chain is going to be a problem the...
